Is this a MK1 booster or not, i think the bracket is correct, but not sure!
Thanks Scott
| ausmini https://www.ausmini.com/forums/ |
|
| Is this a MK1 S booster https://www.ausmini.com/forums/viewtopic.php?f=2&t=68491 |
Page 1 of 1 |
| Author: | 850 GT [ Wed Jan 26, 2011 5:31 pm ] |
| Post subject: | Is this a MK1 S booster |
Is this a MK1 booster or not, i think the bracket is correct, but not sure!
Thanks Scott |
|
| Author: | 850man [ Wed Jan 26, 2011 8:58 pm ] |
| Post subject: | |
Looks like a Mk 1 booster to me. 
|
|
| Author: | drmini in aust [ Wed Jan 26, 2011 9:09 pm ] |
| Post subject: | |
Is the bracket right though, if it is, it's bent 90°. And it's missing the loop bracket at the other end. |
|
| Author: | 66S [ Thu Jan 27, 2011 8:01 am ] |
| Post subject: | |
It definately looks like a Lockheed 5.5" servo, correct for a Mk1. The rear bracket has been bent and is bolted back-to-front on the servo. As the Doc says, the front bracket is missing. There are other applications for this servo, some have a different bore size but, because of the bracket, there's a good chance it's off an "S". Regards Al |
|
| Author: | michaelb [ Thu Jan 27, 2011 11:09 am ] |
| Post subject: | |
Its a very sad example of a MK1 S booster. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|