Does anyone know which terminal is positive/negative on the connector on top of the fuel pump assembly? One is coloured brass, the other silver if that helps.

I want to put a inertia switch in, you know, used to isolate the fuel pump in the event of a very sharp deceleration - eg a collision. Where can I get a S/H one?

Edit: This is a new one - http://www.minispares.com/Product.aspx?ty=pb&pid=42336&title=

_________________
'68 Morris Mini 1310 A+ (Now Sold!)

Are you using a SPI/MPI fuel tank and pump?
If you are have a look at the following links
http://mini.nicehelp.co.uk/Circuit%20Diagrams.pdf (1.06 MB)
http://mini.nicehelp.co.uk/Work%20Shop%20Maunal.pdf (4.53MB)
Cheers Pete

_________________
A recent study found the average Aussie walks about 900 miles a year
Another study found Aussies drink, on average, 22 gallons of alcohol a year
That means, on average, Australians get about 41 miles per gallon

Kind of makes you proud to be an AUSSIE

Yes using EFI fuel tank. I found the "Maunal.PDF", but not the circuit diagrams. Downloading now! Thanks.

Jim

_________________
'68 Morris Mini 1310 A+ (Now Sold!)