| ausmini https://www.ausmini.com/forums/ |
|
| Tail Light Globes https://www.ausmini.com/forums/viewtopic.php?f=2&t=68517 |
Page 1 of 1 |
| Author: | Hanra [ Thu Jan 27, 2011 1:26 pm ] |
| Post subject: | Tail Light Globes |
I know Id have the info at home, but was gunna pick some new globes up on my way home this arv. A few years back I fitted LED stop/tail and ind lamps. I think they might be to directional and dont light the plastic lens up as well as a standard filament lamp. So what is the recommended wattage of stop/tail and ind lamps? These are they ones currently fitted: 
|
|
| Author: | VulcanBB18 [ Thu Jan 27, 2011 2:11 pm ] |
| Post subject: | |
Yeah I reckon they're too directional as well, you'd need some sort of diffuser on a mini tailight. Are you after the original spec lamp ratings? Brake is dual filament 21W+5W & the indicator is just a single 21W. cheers Jacob |
|
| Author: | Hanra [ Thu Jan 27, 2011 2:22 pm ] |
| Post subject: | |
Brilliant. Yeah just after the stock ratings. |
|
| Author: | Hanra [ Fri Jan 28, 2011 11:21 pm ] |
| Post subject: | |
Anyone want a free set of LED indicators and Stop/Tail lamps? The standard filament globes are much better!!!!! |
|
| Author: | GT mowog [ Sat Jan 29, 2011 6:40 am ] |
| Post subject: | |
I have seen a lot of the LED 'bulbs' available for retro fit as a replacement for the stock filiment types but they all say (to the effect) that they are not suitable for road use. Maybe this is why? |
|
| Author: | Wombat [ Sat Jan 29, 2011 7:02 am ] |
| Post subject: | |
I have something similar to these to install 
|
|
| Author: | Hanra [ Sat Jan 29, 2011 9:13 am ] |
| Post subject: | |
They might b kinda ok with the LEDS around the outside of them. But I found they just weren't as bright as a filament globe. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|