| ausmini https://www.ausmini.com/forums/ |
|
| nose cone removal https://www.ausmini.com/forums/viewtopic.php?f=2&t=68529 |
Page 1 of 2 |
| Author: | (SuX-855) [ Thu Jan 27, 2011 8:51 pm ] |
| Post subject: | nose cone removal |
how hard is it to get a front nose cone off ? |
|
| Author: | sgc [ Thu Jan 27, 2011 8:53 pm ] |
| Post subject: | |
Ease is inversely proportional to how much you want to use it again... |
|
| Author: | simon k [ Thu Jan 27, 2011 8:54 pm ] |
| Post subject: | |
very easy.... angle grinder gets it off pretty quick or you can drill out all the spot welds, which takes a bit longer |
|
| Author: | (SuX-855) [ Thu Jan 27, 2011 8:54 pm ] |
| Post subject: | |
yeah wanna use it again |
|
| Author: | simon k [ Thu Jan 27, 2011 8:58 pm ] |
| Post subject: | |
do you want to use the car again? |
|
| Author: | (SuX-855) [ Thu Jan 27, 2011 9:04 pm ] |
| Post subject: | |
nah its defected so im tryting to sell all panels and parts and when removing the front do all the inside panels come off with it |
|
| Author: | sgc [ Thu Jan 27, 2011 9:09 pm ] |
| Post subject: | |
|
|
|
| Author: | Mokesta [ Thu Jan 27, 2011 9:09 pm ] |
| Post subject: | |
It got a defect notice, so why does that mean it has to be sold or cut to piece? Why not just fix the two things wrong and get it inspected? M 
|
|
| Author: | SuperCooper [ Thu Jan 27, 2011 9:26 pm ] |
| Post subject: | |
Just remember: "Installation of the nose cone is then a reversal of the removal procedure" |
|
| Author: | DTrain [ Thu Jan 27, 2011 9:27 pm ] |
| Post subject: | |
you dont have time to fix a few really easy things, but you have time to drill all the spot welds out or cut the panels off with a grinder?
|
|
| Author: | (SuX-855) [ Thu Jan 27, 2011 9:31 pm ] |
| Post subject: | |
yes because i know the whole car wouldnt get through inspection it would take a few grand to get it there and i just dont have that kinda money |
|
| Author: | 1275LS [ Thu Jan 27, 2011 11:15 pm ] |
| Post subject: | |
My five cents is to sell the shell complete. That way someone who does have the time or money can get it going again. |
|
| Author: | simon k [ Fri Jan 28, 2011 7:42 am ] |
| Post subject: | |
1275LS wrote: My five cents is to sell the shell complete. That way someone who does have the time or money can get it going again.
ditto... |
|
| Author: | (SuX-855) [ Fri Jan 28, 2011 8:14 am ] |
| Post subject: | |
ive tryed that |
|
| Author: | simon k [ Fri Jan 28, 2011 9:07 am ] |
| Post subject: | |
(SuX-855) wrote: ive tryed that
just realised - is it Leema's old car? I think he had in his signature that it had a dodgy roundnose conversion or something but anyway, drill out the spot welds, or grind off whatever welds are there |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|