| ausmini https://www.ausmini.com/forums/ |
|
| Brisbane radiator re-core q? https://www.ausmini.com/forums/viewtopic.php?f=2&t=68602 |
Page 1 of 1 |
| Author: | flamingdrongo [ Sun Jan 30, 2011 8:57 pm ] |
| Post subject: | Brisbane radiator re-core q? |
Both minis. Late 70s leylands running scary hot ( I can smell it, it's pinging hard, power goes way down, factory temp gauge pinned to the top). Both have heater pipes off the rad. Where in Bris to get a quality re-core without breaking the bank? PS seriously tempted by those $100 eBay alloy rads, though need new hoses for the heater take off. Any advice much appreciated. 
|
|
| Author: | dodge [ Sun Jan 30, 2011 9:00 pm ] |
| Post subject: | |
go the alloy one |
|
| Author: | flamingdrongo [ Sun Jan 30, 2011 9:03 pm ] |
| Post subject: | |
Anyone second that? |
|
| Author: | TheMiniMan [ Sun Jan 30, 2011 9:24 pm ] |
| Post subject: | |
I`ve been using them for ages, no dramas here turbo injected twin cams pushing over 160hp with no probs (so far, touch my woody) |
|
| Author: | flamingdrongo [ Sun Jan 30, 2011 9:32 pm ] |
| Post subject: | |
Will do. I probably wouldn't touch ya woody Matt, not that there's anything wrong with that. Maybe if it's got bigger than 10" though. I kid. |
|
| Author: | TheMiniMan [ Sun Jan 30, 2011 9:36 pm ] |
| Post subject: | |
nah,,, it stops at 9,,, you`re safe
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|