ausmini
https://www.ausmini.com/forums/

thermo fan
https://www.ausmini.com/forums/viewtopic.php?f=2&t=68662		 Page 1 of 3
Author:  i got a mini [ Thu Feb 03, 2011 7:16 am ]
Post subject:  thermo fan
hey guys can some one post up some pics of were they fitted there thermo fan cause mine wont fit and i cant work it out thanks :)
Author:  Harley [ Thu Feb 03, 2011 7:34 am ]
Post subject: 
What sort is it?
Author:  Fat Boy Dave [ Thu Feb 03, 2011 7:40 am ]
Post subject: 
I put mine in the inner guard ( not in the engine bay). Will try and take some pics tonight.
Author:  mattsmadmini [ Thu Feb 03, 2011 8:27 am ]
Post subject: 
mattsmadmini wrote:
fitted my thermo (at present just on always through 12v ign. all fused up nicely...

just a 25 buck ebay buy, great flow for a 9"
Image
fits like a glove!
Image


There ya go
Author:  Cooper_Matrikon [ Thu Feb 03, 2011 10:13 am ]
Post subject: 
How do you mount it in the inner guard? Any major brackets/mods required. Barney has not enjoyed the last few days of sitting in traffic at 40°+. Do they make a noticeable difference? I have a couple of spare switches in the dash that would be handy to be able to flick on some extra air.
Author:  Cooper_Matrikon [ Thu Feb 03, 2011 10:18 am ]
Post subject: 
Just found this post. Again, search is your friend....

http://www.ausmini.com/forums/viewtopic.php?t=67382&highlight=thermo+fan
Author:  awdmoke [ Thu Feb 03, 2011 10:29 am ]
Post subject: 
Cooper_Matrikon wrote:
How do you mount it in the inner guard?

You don't. It comes with a fitting kit that attaches it to the radiator through the core.
Author:  Cooper_Matrikon [ Thu Feb 03, 2011 10:34 am ]
Post subject: 
"I see!", said the blind man. :oops:
Author:  Cooper_Matrikon [ Thu Feb 03, 2011 10:36 am ]
Post subject: 
One of these puppies?

http://cgi.ebay.com.au/Chrome-Body-9-INCH-THERMO-FAN-kit-electric-fan-/220725287949?pt=AU_Car_Parts_Accessories&hash=item3364409c0d#ht_3451wt_1139
Author:  awdmoke [ Thu Feb 03, 2011 10:40 am ]
Post subject: 
That looks like a good buy for under $40

Those are the mounts I use too.
Image
Author:  Fat Boy Dave [ Thu Feb 03, 2011 10:42 am ]
Post subject: 
How did you fasten that one in Matt?
Author:  Harley [ Thu Feb 03, 2011 11:00 am ]
Post subject: 
I have a rover one in my car. Sits in the inner guard, bolts right in no mods to the car, and has a proper shroud for correct air flow.
Author:  68Rusty [ Thu Feb 03, 2011 12:29 pm ]
Post subject: 
Harley wrote:
I have a rover one in my car. Sits in the inner guard, bolts right in no mods to the car, and has a proper shroud for correct air flow.


Hi Harley,
Do you still have the old fan on the water pump as well as electric rover fan?

I have been wondering if the rover fan would do enough on its own?
Author:  mattsmadmini [ Thu Feb 03, 2011 1:01 pm ]
Post subject: 
Fat Boy Dave wrote:
How did you fasten that one in Matt?


The same way AWD mentioned...it did make it a bit more fidely for a while, but have now changed radiator and shroud, so no probs :)
Author:  drmini in aust [ Thu Feb 03, 2011 1:11 pm ]
Post subject: 
Real Minis in good condition don't need thermo fans... I'd add a heater core aux radiator instead. :lol: :P
Page 1 of 3 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/