| ausmini https://www.ausmini.com/forums/ |
|
| Front lower arms https://www.ausmini.com/forums/viewtopic.php?f=2&t=68774 |
Page 1 of 1 |
| Author: | poeee [ Wed Feb 09, 2011 5:05 pm ] |
| Post subject: | Front lower arms |
They aren't the same from side to side? I thought a pair I had put aside were infact a pair, but have the same number? |
|
| Author: | poeee [ Wed Feb 09, 2011 5:30 pm ] |
| Post subject: | |
Worked it out, it's all about the taper for the ball joint. Thanks Mick. |
|
| Author: | Mick [ Wed Feb 09, 2011 6:24 pm ] |
| Post subject: | |
No sé lo que quieres decir. Una ardilla no sirve de nada para mí aquí. |
|
| Author: | poeee [ Wed Feb 09, 2011 6:49 pm ] |
| Post subject: | |
huh? |
|
| Author: | 850man [ Wed Feb 09, 2011 6:58 pm ] |
| Post subject: | |
850 arms are different to the later type too. |
|
| Author: | MiniKit [ Wed Feb 09, 2011 9:34 pm ] |
| Post subject: | |
Mick wrote: No sé lo que quieres decir. Una ardilla no sirve de nada para mí aquí.
Well acording to the translator program on my pooter the above quote means... I do not know what you mean. A squirrel is useless for me here. Now that just isn't right. 
Bit funny though. |
|
| Author: | MiniBob [ Thu Feb 10, 2011 3:32 pm ] |
| Post subject: | Re: Front lower arms |
poeee wrote: They aren't the same from side to side? I thought a pair I had put aside were infact a pair, but have the same number?
I sent an e-mail to a certain supplier pointing that out after trying to thump, hammer and even use a trolley jack to get one to go onto the taper. Then realised the mistake. Luckilly didn't damage the hole 
|
|
| Author: | poeee [ Thu Feb 10, 2011 3:48 pm ] |
| Post subject: | |
850man wrote: 850 arms are different to the later type too.
I found that out when I went to put the nolathane bushes in that I had laying around for years (they were the straight 850 type). |
|
| Author: | jb007 [ Thu Feb 10, 2011 9:24 pm ] |
| Post subject: | |
MiniKit wrote: Mick wrote: No sé lo que quieres decir. Una ardilla no sirve de nada para mí aquí. Well acording to the translator program on my pooter the above quote means... I do not know what you mean. A squirrel is useless for me here. Now that just isn't right. Bit funny though. Maybe he meant: "pass me another hamster, I appear to have burst this one" |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|