just went and had a look at my strips and they are the same as angus mentioned without the lip. Will make a tip to supercheap and let you know how I go people.
Gafmo
It's not good enough. lift your game!
| ausmini https://www.ausmini.com/forums/ |
|
| van rear door seals https://www.ausmini.com/forums/viewtopic.php?f=2&t=69332 |
Page 1 of 2 |
| Author: | floss [ Thu Mar 10, 2011 7:07 am ] |
| Post subject: | van rear door seals |
Hey everyone, so previously I tried to put some new rear van door rubber seals in. I failed dismally and once installed the doors wouldn't shut! In the end I gave up and removed the bottom and outside portion on one side. I have just got some more and some clips. What is the secret? Any tips would be appreciated hugely. I think the lack of seal has something to do with my exhaust smell problem. [/quote] |
|
| Author: | 1962CKD [ Thu Mar 10, 2011 11:05 am ] |
| Post subject: | Referral |
Best you go to the Horses mouth Call: Mackay Consolidated Head Office, Engineering & Manufacturing 260 Chesterville Road PO Box 1113 Moorabbin Victoria 3189 Australia Telephone +61 3 9555 6500 Facsimile +61 3 9276 8882 and talk to them, they will know the tricks and tips. They even have a host of part numbers for the mini range. http://www.mackayrubber.com.au/all-catalogues.htm Let me know how you go as I have this same issue ahead of me. Good luck |
|
| Author: | 76van [ Thu Mar 10, 2011 7:43 pm ] |
| Post subject: | |
would like to hear any advice as well,this is one of the next jobs on my list |
|
| Author: | GT mowog [ Thu Mar 10, 2011 7:48 pm ] |
| Post subject: | Re: Referral |
1962CKD wrote: Best you go to the Horses mouth
Call: Mackay Consolidated Head Office, Engineering & Manufacturing 260 Chesterville Road PO Box 1113 Moorabbin Victoria 3189 Australia Telephone +61 3 9555 6500 Facsimile +61 3 9276 8882 and talk to them, they will know the tricks and tips. They even have a host of part numbers for the mini range. http://www.mackayrubber.com.au/all-catalogues.htm Let me know how you go as I have this same issue ahead of me. Good luck Didn't know / think that Mackay did door rubbers, only hoses and mounts. Could find it in their catalogues. It has always been the likes of Spectrum that have done the door type rubbers. |
|
| Author: | gafmo [ Thu Mar 10, 2011 8:33 pm ] |
| Post subject: | |
also very interested in this topic as Marcia is about to be on the road with minimal seals on the rear doors |
|
| Author: | floss [ Fri Mar 11, 2011 11:24 am ] |
| Post subject: | |
I was secretly hoping that you would have already have done this Gafmo. I might have a crack tomorrow and see how i go. David |
|
| Author: | Angusdog [ Fri Mar 11, 2011 12:35 pm ] |
| Post subject: | |
What are the new seals like? I have a set form Minisport in the UK, which is different to the original profile in that it doesn't have a little groove for the original clips to hook into, so I'll try that "body mounting" tape they sell in Supercheap, unless anyone has a better idea? |
|
| Author: | gafmo [ Fri Mar 11, 2011 7:52 pm ] |
| Post subject: | |
Sorry David. its amazing what you go to get a car on the road but you forget a number of things. Its a wake up when you go for the first real drive to get a blue slip and they slap around worse than a Dunny door. Its a must for me also |
|
| Author: | floss [ Sat Mar 12, 2011 5:03 am ] |
| Post subject: | |
just went and had a look at my strips and they are the same as angus mentioned without the lip. Will make a tip to supercheap and let you know how I go people. Gafmo It's not good enough. lift your game!
|
|
| Author: | gafmo [ Sun Mar 20, 2011 7:52 pm ] |
| Post subject: | |
Floss any additional info by chance |
|
| Author: | gafmo [ Sat Aug 27, 2011 10:01 am ] |
| Post subject: | |
Thread revival. I finally got my rear door rubbers from KC How did you guys attach the rubbers on? |
|
| Author: | NG [ Sat Aug 27, 2011 9:12 pm ] |
| Post subject: | |
next job on my list as well |
|
| Author: | Fiji [ Sat Aug 27, 2011 9:16 pm ] |
| Post subject: | |
hey gaf any more bling updates. i miss the shinney |
|
| Author: | gafmo [ Sat Aug 27, 2011 9:37 pm ] |
| Post subject: | |
no..Finishing a friends rocker cover but haven't had much time of late. Just gave my Austin Grill for Marcia a once over for tomorrow. I have had my HIF44 blasted and look brilliant, but will only do the Dashpot in the next few months |
|
| Author: | gafmo [ Sat Aug 27, 2011 9:39 pm ] |
| Post subject: | |
Any ideas about the rubbers, Sikaflex or Quick Grip |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|