| ausmini https://www.ausmini.com/forums/ |
|
| Competition Layshafts from UK https://www.ausmini.com/forums/viewtopic.php?f=2&t=69415 |
Page 1 of 1 |
| Author: | TK [ Sun Mar 13, 2011 5:31 pm ] |
| Post subject: | Competition Layshafts from UK |
Just a heads up. Today my good friend was assembling my new gearbox for Slidey when he discovered a problem. The new competition layshaft was bent! 20thou run out. I bought this as a gearbox rebuild kit from Minispares a few months ago. So be carefull when ordering stuff and check everything when it arrives. 
|
|
| Author: | TheMiniMan [ Sun Mar 13, 2011 9:21 pm ] |
| Post subject: | |
some (2) i have found in recent years to be oversize,,, won`t fit ,,, too big got to be careful hey? |
|
| Author: | drmini in aust [ Sun Mar 13, 2011 10:00 pm ] |
| Post subject: | |
I had a bent Minispares one, but it was some years ago. Their layshafts are supposed to be good (ie, hard) now but I'm still using my stock of Oz made ones [edit] made by Heritage MG. |
|
| Author: | GT mowog [ Mon Mar 14, 2011 4:13 am ] |
| Post subject: | |
The UK has lost their ability to do 'engineering' in recent years. The quality of so many machined components is not what it should be. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|