| ausmini https://www.ausmini.com/forums/ |
|
| Wiring looms? https://www.ausmini.com/forums/viewtopic.php?f=2&t=69473 |
Page 1 of 1 |
| Author: | nathanm [ Tue Mar 15, 2011 7:45 pm ] |
| Post subject: | Wiring looms? |
Gday it's getting to the stage in my project where i need to buy a new wiring loom and was wondering which wiring loom suits my needs, as my car will not be 100% original it is a 69 k with an 1100s motor which has a generator i was going to buy from this mob http://www.vinwire.com.au/pdfs/MN-pricelist.pdf which do you think would best suit? Cheers |
|
| Author: | adamstuart [ Tue Mar 15, 2011 7:48 pm ] |
| Post subject: | |
Vinwire is definitely where you want to go. Have a chat to them, they will customise it to your needs. |
|
| Author: | 850man [ Tue Mar 15, 2011 9:33 pm ] |
| Post subject: | |
Go and see Paul at Vintage Wiring Harness's he will make you what you need. postal address: po box 2288 ringwood north, vic 3134 factory address: factory 7 477 maroondah highway ringwood vic 3134 ph 03 9870 0583 | fax 03 9870 0529 |email [email protected] |
|
| Author: | GT mowog [ Wed Mar 16, 2011 5:54 am ] |
| Post subject: | |
Vinwire do a jood job, but don't forget Scott's do them too;- http://www.scottsoldautorubber.com.au/V ... 20Nash.htm |
|
| Author: | 850man [ Wed Mar 16, 2011 6:51 am ] |
| Post subject: | |
GT mowog wrote: Vinwire do a jood job, but don't forget Scott's do them too;-
http://www.scottsoldautorubber.com.au/V ... 20Nash.htm Yes, but Scott gets them from Vinwire. 
I know Scott quite well, I used to mow his lawns in a previous life. |
|
| Author: | GT mowog [ Wed Mar 16, 2011 8:19 am ] |
| Post subject: | |
850man wrote: GT mowog wrote: Vinwire do a jood job, but don't forget Scott's do them too;- http://www.scottsoldautorubber.com.au/V ... 20Nash.htm Yes, but Scott gets them from Vinwire. I know Scott quite well, I used to mow his lawns in a previous life. Funny, I thought that he did
|
|
| Author: | Mike Montgomery [ Wed Mar 16, 2011 12:08 pm ] |
| Post subject: | |
I just got mine from Classic Wiring looms and it is absolutely fantastic. They will add anything you need and wrap it how you wish. Took them a week to deliver it and it was about $550 www.classicwiringlooms.com.au |
|
| Author: | mad-mk1 [ Wed Mar 16, 2011 1:05 pm ] |
| Post subject: | |
i got mad-mk1s loom made by vintage wiring looms, a bliss to deal with, and fantastic product. |
|
| Author: | nathanm [ Wed Mar 16, 2011 4:46 pm ] |
| Post subject: | |
Sweet good to hear i will give him a call tomorrow 
nathan |
|
| Author: | seifer [ Thu Mar 17, 2011 8:10 am ] |
| Post subject: | |
I used a EZ wiring universal kit for hot-rods similar to this: http://cgi.ebay.com.au/20-Circuit-Wirin ... 2eb3e84d1c Works out cheaper, plenty of fuses, the wires are labeled every 10cms, just chop off the wires you dont need and hook it up. May not be close to original but heck it works. |
|
| Author: | Clutch-monkey [ Sat Jul 30, 2011 9:03 am ] |
| Post subject: | |
just a quick bump - is there a place in brisbane that offers similar service to classic wiring looms etc? |
|
| Author: | Wombat [ Sat Jul 30, 2011 10:06 am ] |
| Post subject: | |
Check with Tony (Convertible Mini) -being an auto elec dealing in Minis he will know. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|