| ausmini https://www.ausmini.com/forums/ |
|
| Door Assembly https://www.ausmini.com/forums/viewtopic.php?f=2&t=69584 |
Page 1 of 1 |
| Author: | Dave68Mini [ Sun Mar 20, 2011 12:39 pm ] |
| Post subject: | Door Assembly |
After being apart for 3 years Im about to put my doors back together. Im waiting on quarter vent rubbers and bailey channels but I was wondering if i can get the window winding machanisim and all the door locking mechanisim back in before I put the quarter vent back in or should I do the quarter vent first. They've been apart that long I've forgotten in which order I took them out. 
Thanks Dave |
|
| Author: | mini1990 [ Sun Mar 20, 2011 1:08 pm ] |
| Post subject: | |
Do locking and winder mechanisms first. Then go about replacing your rubber and then lastly you can put the quarter window and normal window in. |
|
| Author: | Dave68Mini [ Sun Mar 20, 2011 1:19 pm ] |
| Post subject: | |
Thanks mini 1990. I thought it would be normal window and then quarter vent but its the other way around? Dave |
|
| Author: | mini1990 [ Sun Mar 20, 2011 1:22 pm ] |
| Post subject: | |
Well do both windows at the same time. Put your main glass in the slot and then squeeze your quarter window in. Line up the main glass in the tracks and attach to the winder and then bolt the quarter in. Its a bit fiddly, and you might wanna put tape on the top of your door so you dont scratch your paint. |
|
| Author: | Dave68Mini [ Mon Mar 21, 2011 10:05 am ] |
| Post subject: | |
Thanks for your help 
Dave |
|
| Author: | Harley [ Mon Mar 21, 2011 10:16 am ] |
| Post subject: | |
I'm doing my doors at the moment. From completely bare doors, do the outer handle first, then the inner lock mechanism, then the inner door release mechanism followed by the window regulator. Don't know the rest of the order I haven't got that far! 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|