| ausmini https://www.ausmini.com/forums/ |
|
| Silicone Hose https://www.ausmini.com/forums/viewtopic.php?f=2&t=69605 |
Page 1 of 1 |
| Author: | tracytracey [ Sun Mar 20, 2011 8:08 pm ] |
| Post subject: | Silicone Hose |
Just wondering if anyone has used these http://cgi.ebay.com.au/Austin-ROVER-MIN ... 45f9020ac5 and if so what are they like? Also what is the hose on the left and also on the one in the middle? I have only a top and bottom hose on mine with no off shoots. Cheers James. |
|
| Author: | superSeven [ Sun Mar 20, 2011 8:15 pm ] |
| Post subject: | Re: Silicone Hose |
tracytracey wrote: Just wondering if anyone has used these
http://cgi.ebay.com.au/Austin-ROVER-MIN ... 45f9020ac5 and if so what are they like? Also what is the hose on the left and also on the one in the middle? I have only a top and bottom hose on mine with no off shoots. Cheers James. I believe those hoses are to suit late model rover minis? Minis Plus at www.minis.com.au has silicon hoses to suit 1275 Aus minis. Disclaimer: I am in no way affiliated with Minis Plus. |
|
| Author: | Harley [ Sun Mar 20, 2011 8:25 pm ] |
| Post subject: | |
I have a set on my car, no problems getting them to fit, but make sure you get some good narrow rolled lip hose clamps to secure them with. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|