I've seen MiniSport 1.5 ones get flats on the rollers, because they didn't (roll)
I run the MiniSpares 1.5 forged ones, and so do many racers.
| ausmini https://www.ausmini.com/forums/ |
|
| OPINION Of roller rockers https://www.ausmini.com/forums/viewtopic.php?f=2&t=6984 |
Page 1 of 1 |
| Author: | clubmn [ Sun May 08, 2005 10:10 am ] |
| Post subject: | OPINION Of roller rockers |
I was wondering what the opinion, people have on roller rockers, and if anyone has ever had a standard rockers snap. What are you race guys running. and has anyone had problems with rollers |
|
| Author: | TK [ Sun May 08, 2005 10:53 am ] |
| Post subject: | |
Mini Spares 1.5 Roller Rockers in my race engine. |
|
| Author: | drmini in aust [ Sun May 08, 2005 11:04 am ] |
| Post subject: | |
I've seen MiniSport 1.5 ones get flats on the rollers, because they didn't (roll)
I run the MiniSpares 1.5 forged ones, and so do many racers.
|
|
| Author: | justminis [ Sun May 08, 2005 11:09 am ] |
| Post subject: | |
Titan 1.5 full roller set in my race engine. Next time I would go for the bushed version rather than the needle roller version, the needle rollers are hard on the rocker shaft, even the Titan rocker shaft. I've replaced 2 in bit over 5 years. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|