| ausmini https://www.ausmini.com/forums/ |
|
| fitting a brake booster, Help. https://www.ausmini.com/forums/viewtopic.php?f=2&t=70172 |
Page 1 of 1 |
| Author: | samcar [ Sat Apr 16, 2011 5:13 pm ] |
| Post subject: | fitting a brake booster, Help. |
hi everyone, just wanted to know when fitting a mark 2 brake booster to a mini k with a 1310 engine the pipe that goes from the master cylnder goes into a T piece and one of those pipes goes to the front wheeles and the other pipe to the back wheeles, what i'd like to know is the section of the pipe that comes from the master cylnder and goes into the T piece is the T piece end of the pipe a Ball or Inverted flare. thanks for any help with this. 
|
|
| Author: | Mick [ Sat Apr 16, 2011 5:50 pm ] |
| Post subject: | |
It's the same ball flare for both ends. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|