Any one else had trouble?

My last condensor lasted about 20km, the one I replaced it with has died within about 1000km, although is probably 18months old.
Im running a 45d dizzy

Ive also killed a not very old (2000km perhaps) Bosch 12v non resistor type coil,

so,am I having bad luck, is my car evil,or is the quality of the product slipping...

all products were australian made - do you send the stuff that failed quality control to nz ?

_________________
speed costs....how fast do you want to go...

I think you will find the Bosch condensers etc are made in China now. You are only the latest bloke to kill one.
Contact Mini King for condensers that don't go Bang! (theirs are UK made I think).
Or preferably toss it and the points, then fit an electronic module in there. This is 2011....

[edit] Looks like Bosch Oz are closing down and going offshore-
http://forums.whirlpool.net.au/forum-re ... ?t=1668163

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Cheers doc, I was thinking it must be megajolt time..

_________________
speed costs....how fast do you want to go...