thanks for the tip i hooked some up . cheers miniman. thought he'd be byroning it up for sure. lets just say he's got some missed calls.
| ausmini https://www.ausmini.com/forums/ |
|
| brissy can anyone help me out . https://www.ausmini.com/forums/viewtopic.php?f=2&t=70286 |
Page 1 of 1 |
| Author: | Fiji [ Sat Apr 23, 2011 2:34 pm ] |
| Post subject: | brissy can anyone help me out . |
was retorqueing the head as the headgasket has been changed and ive done about 1000 ks ... and i'v realised that i have stripped 2 rocker bolts( 1st one was fine the 2nd and 3rd were gone and well havent got to the 4th one yet. these are the ones to be tensioned to 25lb. anyone in brissy got a set of these i can buy. pretty grim ask as everyones probably away. just i'm gonna be stuck with no wheels over the next couple of day s if i can't sort this .... thats going to suk. worth a shot anyway. i doubt any stores will stock these locally ? supercheap and co ? fiji. |
|
| Author: | Mick [ Sat Apr 23, 2011 3:35 pm ] |
| Post subject: | |
Will supercrap have a set of these studs (as bolts however) on their shelves in hi tensile UNC? Not the ideal but will do the job as they are only being torqued up to 25 lbs... Enough to get you out of a bind I think. |
|
| Author: | Fiji [ Sat Apr 23, 2011 4:32 pm ] |
| Post subject: | |
thanks for the tip i hooked some up . cheers miniman. thought he'd be byroning it up for sure. lets just say he's got some missed calls.
|
|
| Author: | Mick [ Sat Apr 23, 2011 4:51 pm ] |
| Post subject: | |
Good job |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|