ausmini https://www.ausmini.com/forums/ |
|
10'' wheels and disc brakes https://www.ausmini.com/forums/viewtopic.php?f=2&t=70311 |
Page 1 of 2 |
Author: | Mike Montgomery [ Mon Apr 25, 2011 3:15 pm ] |
Post subject: | 10'' wheels and disc brakes |
What is the smallest wheel you can fit over a cooper S disc brake? I'm looking to run a wide 10'' without flares |
Author: | poeee [ Mon Apr 25, 2011 3:28 pm ] |
Post subject: | |
You are pretty limited with what you can run without flares. LS Contessa's will fit without flares, but I believe you sometimes need to file the caliper a tad. I just squeeze Globe sprintmasters on my pano. |
Author: | Morris 1100 [ Mon Apr 25, 2011 3:40 pm ] |
Post subject: | |
LS Contessas are very popular on the Group N cars. It makes them hard to get. |
Author: | slacko [ Mon Apr 25, 2011 5:19 pm ] |
Post subject: | |
there was a nice white mini at Wakefield in the show and shine car ports that had a set of Performance 10 inc mags that sat under the guards without flares , Wish I took more notice at the time as I to am looking for mags that will fit without flares . I have cooper s discs and drums . Mark |
Author: | 1071 S [ Mon Apr 25, 2011 6:12 pm ] |
Post subject: | |
Minilife/minilite 4.5s will fit with 165s Cheers, Ian |
Author: | Kennomini [ Mon Apr 25, 2011 6:30 pm ] |
Post subject: | |
My car Sonic has LS contessa's on S disc brakes and S spaced rear drums. ![]() |
Author: | Kennomini [ Mon Apr 25, 2011 7:18 pm ] |
Post subject: | |
Do 'S' steel rims need flairs with disc brakes? |
Author: | Morris 1100 [ Mon Apr 25, 2011 7:20 pm ] |
Post subject: | |
Kennomini wrote: Do 'S' steel rims need flairs with disc brakes? They didn't till 1969.
|
Author: | Lillee [ Mon Apr 25, 2011 7:33 pm ] |
Post subject: | |
poeee wrote: LS Contessa's will fit without flares, but I believe you sometimes need to file the caliper a tad. This is what I run in Lillee. See signature pic. Morris 1100 wrote: LS Contessas are very popular on the Group N cars. It makes them hard to get.
Dam straight! I haven't seen a set for sale for yonks, like last 4 years. Luckily I have a spare set stashed away... |
Author: | Morris 1100 [ Mon Apr 25, 2011 7:46 pm ] |
Post subject: | |
Lillee wrote: poeee wrote: LS Contessa's will fit without flares, but I believe you sometimes need to file the caliper a tad. This is what I run in Lillee. See signature pic. Morris 1100 wrote: LS Contessas are very popular on the Group N cars. It makes them hard to get. Dam straight! I haven't seen a set for sale for yonks, like last 4 years. Luckily I have a spare set stashed away... It is also a pity that the LS ones have a cracking problem though. ![]() |
Author: | Lillee [ Mon Apr 25, 2011 7:54 pm ] |
Post subject: | |
Yeah I had 3 sets, one had cracks. To be honest, unless you're racing them the cracks are superficial IMO. It would take one heck of a force to break them apart, even with the cracks. I'd hate to see the state of the rest of the car after said force was applied ![]() The other 2 sets have no such cracks, even after 7 years on my car so not sure if it was a casting flaw on a few sets only or what... |
Author: | Morris 1100 [ Mon Apr 25, 2011 8:08 pm ] |
Post subject: | |
Lillee wrote: Yeah I had 3 sets, one had cracks. To be honest, unless you're racing them the cracks are superficial IMO. It would take one heck of a force to break them apart, even with the cracks. I'd hate to see the state of the rest of the car after said force was applied
![]() The other 2 sets have no such cracks, even after 7 years on my car so not sure if it was a casting flaw on a few sets only or what... Oh, I agree. I would be getting the cracks fixed and be using them again. The problem with wheels is that the tyres keep getting stickier and the wheels keep getting older. On the road there is not much of a problem but the track is different. When I was playing with Production Car racing in the 90s we used to flex the centres out of the Commodore "Chaser" wheels because they copped so much load at places like Eastern Creek. I bet the Police never did that on the Highway! ![]() ![]() |
Author: | Lillee [ Mon Apr 25, 2011 8:21 pm ] |
Post subject: | |
Morris 1100 wrote: Oh, I agree. I would be getting the cracks fixed and be using them again.
Interesting you say that, the last person who bought the cracked ones off me did exactly that, and widenned them by 1/2inch... Anyway sorry to hijack thread, let me know too which wheels I can fit over S brakes without flares... |
Author: | poeee [ Mon Apr 25, 2011 8:25 pm ] |
Post subject: | |
slacko wrote: there was a nice white mini at Wakefield in the show and shine car ports that had a set of Performance 10 inc mags that sat under the guards without flares , Wish I took more notice at the time as I to am looking for mags that will fit without flares . I have cooper s discs and drums .
Mark Did it have discs? I thought they only fit with no flares with non-spacer drums... |
Author: | slacko [ Mon Apr 25, 2011 8:52 pm ] |
Post subject: | |
Yes , it did have discs , I remember checking that out , wish I had spoke to the owner , Is there any difference between 7 inch disc and 7.5 inch as far as the off set to the drive flange ? Does one stick out further than the other ? Mark |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |