Try Karcraft or MiniKing.
Not sure if genuine Rover/Heritage ones are still available?
I fitted one last year and was not too bad.
| ausmini https://www.ausmini.com/forums/ |
|
| rear beaver https://www.ausmini.com/forums/viewtopic.php?f=2&t=70416 |
Page 1 of 1 |
| Author: | Goldbrocade_62 [ Fri Apr 29, 2011 9:47 pm ] |
| Post subject: | rear beaver |
Trying to fit up rear beaver to my gt it is crap(can't remember where I bought it had it for years) does anyone in Australia sell a decent one |
|
| Author: | michaelb [ Fri Apr 29, 2011 10:21 pm ] |
| Post subject: | |
Try Karcraft or MiniKing. Not sure if genuine Rover/Heritage ones are still available? I fitted one last year and was not too bad.
|
|
| Author: | flamingdrongo [ Sat Apr 30, 2011 1:11 am ] |
| Post subject: | |
Sorry......highjack....  Who coined the term "beaver" panel and what is the front "beaver" called? Apron??
|
|
| Author: | michaelb [ Sat Apr 30, 2011 7:27 am ] |
| Post subject: | |
I believe you are correct. Front panel is apron |
|
| Author: | low n blown [ Sat Apr 30, 2011 8:12 am ] |
| Post subject: | |
flamingdrongo wrote: Sorry......highjack....
Who coined the term "beaver" panel and what is the front "beaver" called? Apron??"The fun bits"......Come on someone had to say it |
|
| Author: | Goldbrocade_62 [ Thu May 26, 2011 5:51 pm ] |
| Post subject: | |
Heritage rear beaver turned up today trial fitted it looks spot on |
|
| Author: | MiniPete [ Thu May 26, 2011 6:07 pm ] |
| Post subject: | |
Can I ask which supplier you got the heritage panel from? I have 2 to replace soon... Thanks! |
|
| Author: | minimy [ Thu May 26, 2011 10:18 pm ] |
| Post subject: | |
hmmm nice beaver,ok ok had to be said |
|
| Author: | Morris 1100 [ Fri May 27, 2011 4:22 pm ] |
| Post subject: | |
minimy wrote: hmmm nice beaver,ok ok had to be said
Had to be seen. |
|
| Author: | Monaco [ Fri May 27, 2011 7:56 pm ] |
| Post subject: | |
I still cannot take this thread seriously!
|
|
| Author: | 1275LS [ Sat May 28, 2011 1:16 pm ] |
| Post subject: | Re: rear beaver |
Goldbrocade_62 wrote: Trying to fit up rear beaver to my gt it is crap(can't remember where I bought it had it for years) does anyone in Australia sell a decent one
Do all the Australian minis have a Mk 1 rear end and is it different from the later uk cars? |
|
| Author: | GT mowog [ Sat May 28, 2011 2:32 pm ] |
| Post subject: | Re: rear beaver |
1275LS wrote: Goldbrocade_62 wrote: Trying to fit up rear beaver to my gt it is crap(can't remember where I bought it had it for years) does anyone in Australia sell a decent one Do all the Australian minis have a Mk 1 rear end and is it different from the later uk cars? As far as I am aware, all the beaver panels are the same (if that is what you were meaning). The rear body panel (with the window, tail light and boot opening) are different. All ours are the same as the UK MKI, except on our Clubbie ones the cut outs for the tail lights are different. The UK MKII on have a larger window. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|