Fiji wrote:
Thanks GT that was what I was after.
Your welcome
PM sent
| ausmini https://www.ausmini.com/forums/ |
|
| Rear adjustable brackets https://www.ausmini.com/forums/viewtopic.php?f=2&t=70459 |
Page 1 of 1 |
| Author: | Fiji [ Mon May 02, 2011 4:14 pm ] |
| Post subject: | Rear adjustable brackets |
Anyone had experience with these? I have a order in just wanted to add these if they're any good. Price seems ok http://www.minisport.com/mini-spare-par ... S0510.html What has everyone else used ? do they sell them at the likes of karcraft etc? Minisport au has some for 125 + postage. http://www.minisport.com.au/prod19.htm |
|
| Author: | Beanie [ Mon May 02, 2011 4:48 pm ] |
| Post subject: | |
yeah i have a similar set on my car but i have these http://www.minispares.com/Product.aspx? ... 381&title= the adjuster screw makes it heaps easyier to do .. can be a little fiddly and some wheel alignment places dont know how to use them ... Beanie |
|
| Author: | GT mowog [ Mon May 02, 2011 7:45 pm ] |
| Post subject: | |
The ones I use are similar to those in Beanie's post ^. They only do Camber Adjustement and for the Toe Adjustment, I shim the bracket. I use these because the set up has a method of adjustment that cannot slip. That style of bracket from Mini Sport (UK) does both adustments by the one means, so when you get say the toe right, you've then got to slacken it off again to get the camber, but opps, there goes the toe adjustment again! You'd get there, but damm fiddley. And, all you need is a bit of a decent bump and the toe adjustement will be out again. Oh, yeah, and the brackets I use are only about $36 pr....... and I think a buck or less for a shim...... |
|
| Author: | Fiji [ Mon May 02, 2011 7:48 pm ] |
| Post subject: | . |
Thanks GT that was what I was after. Can u let me know where u got them from? I'm in need of a set pretty soon. |
|
| Author: | GT mowog [ Mon May 02, 2011 7:52 pm ] |
| Post subject: | Re: . |
Fiji wrote: Thanks GT that was what I was after.
Your welcome
PM sent |
|
| Author: | gafmo [ Mon May 02, 2011 8:00 pm ] |
| Post subject: | |
I also have similar to Beanie on my Dry Suspention Van and I got mine from KC |
|
| Author: | 1071 S [ Mon May 02, 2011 9:50 pm ] |
| Post subject: | |
The Minisport (UK) versions are OK. Bit fiddly but no real hassle - and once set they stay in adjustment. Cheers, Ian |
|
| Author: | Harley [ Mon May 02, 2011 10:30 pm ] |
| Post subject: | |
I have a set on my car that look like all of the above combined. Serrated edges so they bite in, but adjuster screws to make life easier.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|