Edit - Morris beat me to it!
Gunsons click-adjust, Been about for a very long time, have a look on minisport, under tools, but is available from a multitude of places!
cheers
Kevin
| ausmini https://www.ausmini.com/forums/ |
|
| Where can you get one of... https://www.ausmini.com/forums/viewtopic.php?f=2&t=70545 |
Page 1 of 1 |
| Author: | Drexxle [ Fri May 06, 2011 6:56 pm ] |
| Post subject: | Where can you get one of... |
THESE. http://www.youtube.com/watch?v=EK7_tih9sUU&NR interesting tool, wonder what cost they are. |
|
| Author: | Morris 1100 [ Fri May 06, 2011 7:00 pm ] |
| Post subject: | |
ClickAdjust |
|
| Author: | rathcoole [ Fri May 06, 2011 7:02 pm ] |
| Post subject: | |
Edit - Morris beat me to it!
Gunsons click-adjust, Been about for a very long time, have a look on minisport, under tools, but is available from a multitude of places! cheers Kevin |
|
| Author: | GT mowog [ Fri May 06, 2011 7:23 pm ] |
| Post subject: | |
Do these suit both the 7/16" AF and 1/2" AF Tappet Adjustment nuts? <EDIT> Yes. http://www.gunson.co.uk/items/pdf/Produ ... ctions.pdf |
|
| Author: | Drexxle [ Fri May 06, 2011 7:46 pm ] |
| Post subject: | |
ima getting me one of them then. |
|
| Author: | Hagar [ Fri May 06, 2011 9:06 pm ] |
| Post subject: | |
I've got one and it's useful, in that you only need two hands to easily set the clearances, whereas before you'd need three hands. They're not really much of a time saver, once you learn the number of clicks you need, they'll save a bit, but I still use mine in conjunction with a set of traditional feeler gauges. Here's an interesting opinion piece on them: http://mgaguru.com/mgtech/tools/ts080.htm |
|
| Author: | Convertible Mini [ Sat May 07, 2011 7:52 am ] |
| Post subject: | Click Adjust |
That is very well written and a very good point. Things we take for granted with instructions. We better think again. I was just about to buy one. Thanks for pointing that out. |
|
| Author: | gafmo [ Sat May 07, 2011 8:54 pm ] |
| Post subject: | |
The Moss TV has many interesting thing to watch and to learn from. Its kind of funny though... Your being spoken by hands |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|