| ausmini https://www.ausmini.com/forums/ |
|
| Compliancing Rovers https://www.ausmini.com/forums/viewtopic.php?f=2&t=70955 |
Page 1 of 1 |
| Author: | blue_deluxe [ Fri May 27, 2011 6:48 pm ] |
| Post subject: | Compliancing Rovers |
Hi everyone, Does anyone know who can compliance a rover mini, other than ozcooper in sydney? Looking at getting one in through a different method so seeing if there are alternatives. Cheers, Joe |
|
| Author: | Monaco [ Fri May 27, 2011 7:14 pm ] |
| Post subject: | |
As far as I know they are the only compliance holders. You could check the RAWS website. |
|
| Author: | Lockie91 [ Fri May 27, 2011 7:41 pm ] |
| Post subject: | Re: Compliancing Rovers |
blue_deluxe wrote: Hi everyone,
Does anyone know who can compliance a rover mini, other than ozcooper in sydney? Looking at getting one in through a different method so seeing if there are alternatives. Cheers, Joe is this the one on ebay going cheap is it 
|
|
| Author: | Monaco [ Fri May 27, 2011 7:46 pm ] |
| Post subject: | |
TK wrote: or you can go the way of a Mini specialist here in Brisbane by using Clubman compliance plates and when Qld Transport question it he says it a Clubby with a roundy front.
 ....and then you can go to jail!
|
|
| Author: | blue_deluxe [ Fri May 27, 2011 10:12 pm ] |
| Post subject: | |
Nah that one on eBay can't be complied easily. Needs to many mods done as it's outside the years that have been done so far. It just gave me the idea. |
|
| Author: | Monaco [ Fri May 27, 2011 10:34 pm ] |
| Post subject: | |
I checked with RAWS and Australian Mini Cooper P/L are the only approved compliance workshop nationwide. |
|
| Author: | EST-071 [ Fri May 27, 2011 10:38 pm ] |
| Post subject: | |
If it is a '88 model or older you can do it yourself and have an engineer sign of on the work done. After that date it has to be done by a RAWS workshop. Cheers Pete |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|