hi guys,
Before I sent my bolts off to be Zinc plated, I had them neatly organised so I knew what went were..... Lets just say now They are all over the place!
So what size are the front and rear bolts...
Cheers Brett
| ausmini https://www.ausmini.com/forums/ |
|
| Subframe Bolts https://www.ausmini.com/forums/viewtopic.php?f=2&t=71233 |
Page 1 of 1 |
| Author: | brett [ Sun Jun 12, 2011 9:39 pm ] |
| Post subject: | Subframe Bolts |
hi guys, Before I sent my bolts off to be Zinc plated, I had them neatly organised so I knew what went were..... Lets just say now They are all over the place!
So what size are the front and rear bolts... Cheers Brett |
|
| Author: | Harley [ Sun Jun 12, 2011 9:59 pm ] |
| Post subject: | |
Most of them are 5/16" UNF. Question seems a bit veigue, anything in particular got you stumped? |
|
| Author: | brett [ Sun Jun 12, 2011 10:02 pm ] |
| Post subject: | |
Ie Rear 2x 2" 5x nyloc bolts etc.... Front... 2 X 1" 3 x 3" etc.... |
|
| Author: | Harley [ Sun Jun 12, 2011 10:12 pm ] |
| Post subject: | |
Is this a start? 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|