| ausmini https://www.ausmini.com/forums/ |
|
| Roll Bar Mounted Harnesses https://www.ausmini.com/forums/viewtopic.php?f=2&t=71702 |
Page 1 of 1 |
| Author: | woodwormm [ Wed Jul 06, 2011 5:37 pm ] |
| Post subject: | Roll Bar Mounted Harnesses |
Following on from this thread http://www.ausmini.com/forums/viewtopic.php?t=71632 where i decided that a harness bar may be my best option. does anyone know of an easy supplier for bar mount harnesses? just looking for a seatbelt style clip with 4 point. either 2 or 3 inch, not too fussed at this stage. |
|
| Author: | mickmini [ Wed Jul 06, 2011 9:37 pm ] |
| Post subject: | |
most harnesses can be made for wrapping around the bar, or you can weld a bracket on for a standard eye bolt mounting. Your best bet is to check with the suppliers like Revolution Racegear or GMP products. |
|
| Author: | woodwormm [ Thu Jul 07, 2011 5:37 am ] |
| Post subject: | |
thanks, yeah i wasnt sure if most harnesses would 'unthread' from the bolt attachment and wrap around a bar.. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|