| ausmini https://www.ausmini.com/forums/ |
|
| Neg camber https://www.ausmini.com/forums/viewtopic.php?f=2&t=71754 |
Page 1 of 1 |
| Author: | Fiji [ Sat Jul 09, 2011 7:24 pm ] |
| Post subject: | Neg camber |
Got my brackets going on the rear tomor .... Difficult to adjust? I'd like to have a crack at it. |
|
| Author: | GT mowog [ Sat Jul 09, 2011 7:36 pm ] |
| Post subject: | |
They are easy as to adjust, you only need a 1/2" AF Spanner to do it, but you need some measuring gear to 'see' what you're adjusting them to. You can do this with a half decent 600 mm level, a rule and some maths, or a spirt level that also reads angles. |
|
| Author: | Fiji [ Sat Jul 09, 2011 8:29 pm ] |
| Post subject: | |
Ye got to the angles right . I'll look for a level with angles |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|