Chasing a P/N for a rotor button to suit a Lucas 29D dizzy? Bosch website lists quite a few different p/n's.
This is the old one I was using:
| ausmini https://www.ausmini.com/forums/ |
|
| Rotor Button https://www.ausmini.com/forums/viewtopic.php?f=2&t=72072 |
Page 1 of 1 |
| Author: | Hanra [ Mon Jul 25, 2011 9:22 am ] |
| Post subject: | Rotor Button |
Chasing a P/N for a rotor button to suit a Lucas 29D dizzy? Bosch website lists quite a few different p/n's. This is the old one I was using:
|
|
| Author: | TheMiniMan [ Mon Jul 25, 2011 9:34 am ] |
| Post subject: | |
it`s the taller of the 3 GL256 from memory |
|
| Author: | GT mowog [ Mon Jul 25, 2011 10:57 am ] |
| Post subject: | |
I've got a P/N of BD256, but I suspect that's been superseded, although it will cross reference. |
|
| Author: | Hanra [ Mon Jul 25, 2011 11:49 am ] |
| Post subject: | |
This one is 30mm tall overall. |
|
| Author: | justminis [ Mon Jul 25, 2011 7:48 pm ] |
| Post subject: | |
Brad I'll have one or two here that you're welcome to. |
|
| Author: | Hanra [ Mon Jul 25, 2011 9:07 pm ] |
| Post subject: | |
Thanks for that Steve, are they new? |
|
| Author: | justminis [ Mon Jul 25, 2011 9:29 pm ] |
| Post subject: | |
Should be at least 1 new one, I'll dig them out and let you know. |
|
| Author: | Hanra [ Mon Jul 25, 2011 9:51 pm ] |
| Post subject: | |
Brilliant, thanks for that Steve. |
|
| Author: | justminis [ Tue Jul 26, 2011 6:09 pm ] |
| Post subject: | |
Brad Have new Bosch GL256 rotor button here. Must have bought it for the Mk 2 S I had, so have to double the price eh 
|
|
| Author: | Hanra [ Tue Jul 26, 2011 8:13 pm ] |
| Post subject: | |
Uh oh...... Awesome work Steve, Ill have to try and get round to pick it up! |
|
| Author: | Mick [ Tue Jul 26, 2011 9:31 pm ] |
| Post subject: | |
We seem quite lucky with the GL256's. They're still available at supercrap off the shelf for some reason. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|