ausmini :: View topic - The Mini Bar

ausmini https://www.ausmini.com/forums/

The Mini Bar https://www.ausmini.com/forums/viewtopic.php?f=2&t=72548	Page 1 of 1

Author:	seifer [ Sat Aug 20, 2011 5:59 pm ]
Post subject:	The Mini Bar
I thought you guys may get a kick out of this... Some of you will remember my Car-BQ from a while back... http://www.ausmini.com/forums/viewtopic ... highlight= Well Ive decided to take a step up and make a bar out of my balcony set up and call it the mini bar. It started around 6 months ago and looked like this... Since then Ive aded a few beer taps pumping out home brew but I thought I might go that one step further and give it a car theme that the title deserves. First things first was to replace the bar top... Heres what I started with: After a bit of cutting, sanding... Im replacing my beer tower with a car muffler, I know it isnt strictly a mini muffler, but I need something with a bit of show and also big enough to hold my taps: As for the tower itself I decided to go with two exhausts and use one simply as a donor for a cover panel The taps will come out of the panel in the pic above, I just need to find a tool capable of drilling a 24cm hole in stainless... Ill post more pics up tomorrow once the tower is mounted and beer is pouring. Ill also include a few pics of the rest of the setup.. including what else im adding to go with the car theme.... Does anyone have an automotive outside temperature gauge btw?

Author:	coopar [ Sat Aug 20, 2011 6:26 pm ]
Post subject:
Cant you get a 24cm holesaw?

Author:	seifer [ Sat Aug 20, 2011 6:34 pm ]
Post subject:
You can but the two I've tried just seem to go blunt. I've got an adjustable hole cutter which looks like it will do the job.

Author:	Panthersteve [ Sat Aug 20, 2011 7:15 pm ]
Post subject:
What do you need a nearly 10" hole for

Author:	gafmo [ Sat Aug 20, 2011 9:23 pm ]
Post subject:
seifer is the hole you need to cut in S/Steel if so I could have someone who can help you.(I think Your In Sydney) which reminds me, I have a job for him also.

Author:	woodwormm [ Sat Aug 20, 2011 10:47 pm ]
Post subject:
i reckon there's probably a few more than just seifer and i who are homebrewers and on the AHB forum as well... i also keep chooks and know another ausminier who's on a poultry forum too funny the tangled web lives we lead!

Author:	seifer [ Mon Aug 22, 2011 12:35 pm ]
Post subject:
A few shots of the finished product.. Pop by for a cold one.

Author:	gafmo [ Mon Aug 22, 2011 8:00 pm ]
Post subject:
Noice

Author:	drmini in aust [ Mon Aug 22, 2011 8:03 pm ]
Post subject:
Maaaate, that bar hauls ass!!

Author:	1310/71 [ Mon Aug 22, 2011 8:13 pm ]
Post subject:
woodwormm wrote: i also keep chooks and know another ausminier who's on a poultry forum Unless he lives in Gulgong, I know another one too!

Author:	Mike_Byron [ Mon Aug 22, 2011 11:20 pm ]
Post subject:
1310/71 wrote: woodwormm wrote: i also keep chooks and know another ausminier who's on a poultry forum Unless he lives in Gulgong, I know another one too! So who knows who then ????

Page 1 of 1	All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/