| ausmini https://www.ausmini.com/forums/ |
|
| Anyone know this? https://www.ausmini.com/forums/viewtopic.php?f=2&t=72635 |
Page 1 of 1 |
| Author: | keastmini [ Wed Aug 24, 2011 9:03 pm ] |
| Post subject: | Anyone know this? |
I'm having a look at this on saturday, but wondered if anyone here knew of it? According to RTA free rego check & the seller its been off the road since 2002. http://nsw.gumtree.com.au/c-Cars-Vehicl ... Z295083368 Also stupid question but I forgot to confirm the engine size when I spoke to seller, is it identifiable from that engine bay shot? 
Any info/advice before I go inspect it is hugely appreciated! Cheers, Nick |
|
| Author: | woodwormm [ Wed Aug 24, 2011 9:22 pm ] |
| Post subject: | |
i can't tell from the pics (someone more tuned in than me may be able to) but i'd be surprised if it wasn't at least an 1100 as from as far as i can squint through the wheel spokes it's got discs.. looks ike a good buy to me. |
|
| Author: | MINImal effort [ Wed Aug 24, 2011 9:25 pm ] |
| Post subject: | |
The heater take off on the head shows it is NOT a 1275... other than that I can't say. Being a 78 would have been a 998 originally ( I think.) .. but anything could have happened since then (eg adding disk brakes shows it's been modified). |
|
| Author: | keastmini [ Wed Aug 24, 2011 9:33 pm ] |
| Post subject: | |
Discs? I clearly need glasses! Cheers guys, I thought it looked quite nice too, but I'll still be taking my cynical mechanic mate along to balance out the enthusiasm
|
|
| Author: | 3DJ [ Thu Aug 25, 2011 12:40 pm ] |
| Post subject: | |
Looks like soe one has hacked into the rear parcel shelf to make way for speakers. Big no, no as it weakens seat belt anchorage and will not pass roadworthy in that condition. |
|
| Author: | Wingman [ Thu Aug 25, 2011 12:53 pm ] |
| Post subject: | |
Hey thats what my car would have looked like , Just for info mine is a 75 Leyland and has an 1100.
Steve |
|
| Author: | CARTER_GT [ Thu Aug 25, 2011 1:19 pm ] |
| Post subject: | |
Rear wheel drive  yea....
|
|
| Author: | keastmini [ Thu Aug 25, 2011 1:40 pm ] |
| Post subject: | |
You mean it's not rear wheel drive?!?!?!?
I know about the speaker holes, I was planning to close them back up if I get it, if I did eventually put rear speakers in I'd go underseat. Cheers for all the input! |
|
| Author: | woodwormm [ Thu Aug 25, 2011 7:04 pm ] |
| Post subject: | |
keastmini wrote: Discs? I clearly need glasses!
if you enlarge the photo of the rim, and squint in the right direction and poke your tongue out at a perpindicular angle to your eyes... there's a square flat edge showing in front of the hub behind the wheel... drums would be round not square i think it's the edge of the caliper showing.
|
|
| Author: | Wombat [ Thu Aug 25, 2011 7:36 pm ] |
| Post subject: | |
I'd buy it for 3G's - I've probably spent 5 times that on mine and it's still not on the road |
|
| Author: | MINImal effort [ Thu Aug 25, 2011 8:43 pm ] |
| Post subject: | |
Quote: if you enlarge the photo of the rim, and squint in the right direction and poke your tongue out at a perpindicular angle to your eyes...
there's a square flat edge showing in front of the hub behind the wheel... drums would be round not square i think it's the edge of the caliper showing. Agree with that.... But must admit my original comment was based on there being a brake booster 
(so no guarantee on disk brakes)... ...... but is still an indication of being modified
|
|
| Author: | keastmini [ Thu Aug 25, 2011 8:48 pm ] |
| Post subject: | |
woodwormm wrote: keastmini wrote: Discs? I clearly need glasses! if you enlarge the photo of the rim, and squint in the right direction and poke your tongue out at a perpindicular angle to your eyes... there's a square flat edge showing in front of the hub behind the wheel... drums would be round not square i think it's the edge of the caliper showing.Yeah I did that originally, and thought I was just seeing shadow Well I can check for sure on sat morning
|
|
| Author: | keastmini [ Mon Aug 29, 2011 3:58 pm ] |
| Post subject: | |
So I had a look on Saturday, decided against it. Had a fair bit of rust around the roof and gutters and the sills. Shame because the paint was original and it looked straight  My mech mate was also worried about the rings being shot and a few other things.
Maybe not too difficult a job for some, but for my first mini I'd like something less ambitious
The search continues!
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|