| ausmini https://www.ausmini.com/forums/ |
|
| cone compressor https://www.ausmini.com/forums/viewtopic.php?f=2&t=72975 |
Page 1 of 1 |
| Author: | dalmeny [ Sun Sep 11, 2011 10:26 pm ] |
| Post subject: | cone compressor |
Cone compresor. What's the going price, and where is the best place to buy one. Is it worth having a thread turned onto a piece of high tensile rod and making one? |
|
| Author: | Wombat [ Sun Sep 11, 2011 10:43 pm ] |
| Post subject: | |
I made one - then discovered I had a mix of metric and imperial threads so bought the correct one from Mini Spares with both threads - easier in the long run |
|
| Author: | Irish Yobbo [ Mon Sep 12, 2011 8:07 am ] |
| Post subject: | |
Wombat wrote: I made one - then discovered I had a mix of metric and imperial threads so bought the correct one from Mini Spares with both threads - easier in the long run
I was considering making my own - is there any way of telling from the year which thread (metric or imperial) is required? |
|
| Author: | Wombat [ Mon Sep 12, 2011 8:38 am ] |
| Post subject: | |
I think you will find any new cones are metric but your old ones you need to take out are imperial - Catch 22 |
|
| Author: | low n blown [ Mon Sep 12, 2011 11:07 am ] |
| Post subject: | |
I have a spare pm me if you are interested. G. |
|
| Author: | ricksmini [ Mon Sep 12, 2011 5:55 pm ] |
| Post subject: | |
i have a cone compressor here in goulburn if you would like to borrow it does both metric and imperial |
|
| Author: | dalmeny [ Mon Sep 12, 2011 7:08 pm ] |
| Post subject: | |
ricksmini wrote: i have a cone compressor here in goulburn if you would like to borrow it does both metric and imperial
Rick, That would be much appreciated I'll send you a PM as soon as I'm ready to swap my cones over. Seeing as we are local to each other It might be good to catch up. Thanks Steve |
|
| Author: | ricksmini [ Mon Sep 12, 2011 9:27 pm ] |
| Post subject: | |
nowories Steve, do you have any hardi spicer spares by any chance? |
|
| Author: | Monster Mini [ Mon Sep 12, 2011 9:29 pm ] |
| Post subject: | |
Adam has a bolt setup compresser pm Adam |
|
| Author: | dalmeny [ Mon Sep 12, 2011 11:38 pm ] |
| Post subject: | |
ricksmini wrote: nowories Steve, do you have any hardi spicer spares by any chance?
Sorry mate, had pot joints on mine that weren't very old and recycled the lot. |
|
| Author: | dalmeny [ Mon Sep 12, 2011 11:42 pm ] |
| Post subject: | |
Monster Mini wrote: Adam has a bolt setup compresser pm Adam
Yeah, had a look at it in my 'wanted'post. Two things - my subby is in the car and I wouldn't get enough lift with an inch of thread on a bolt. |
|
| Author: | ricksmini [ Tue Sep 13, 2011 7:24 am ] |
| Post subject: | |
nowories steve just let us know when you would like to borrow it |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|