No sticky that I know of
Generally people just post numbers, and morris 1100 deciphers them for you
| ausmini https://www.ausmini.com/forums/ |
|
| Is there a sticky to help identify mini's https://www.ausmini.com/forums/viewtopic.php?f=2&t=73080 |
Page 1 of 2 |
| Author: | Baracade [ Sat Sep 17, 2011 9:58 pm ] |
| Post subject: | Is there a sticky to help identify mini's |
Hey all, Am I just being silly as I cant find a thread to identify my moke or the engine inside it.. Can you please point me in the right direction. Cheers Dean |
|
| Author: | adamstuart [ Sat Sep 17, 2011 10:00 pm ] |
| Post subject: | |
No sticky that I know of Generally people just post numbers, and morris 1100 deciphers them for you
|
|
| Author: | Morris 1100 [ Sat Sep 17, 2011 10:02 pm ] |
| Post subject: | |
Export moke Motor = 1204. 
|
|
| Author: | adamstuart [ Sat Sep 17, 2011 10:02 pm ] |
| Post subject: | |
Alternatively, do what I do: Stick the first few digits of your engine number into google and see what comes up. There's also this list: http://www.minimania.com/MM/Engine___Id ... PDATED.htm But it only has the 850cc moke engine listed - You might not have a moke 1275, so it's worth a check anyway If all else fails, put it on the forum, someone will know |
|
| Author: | Baracade [ Sat Sep 17, 2011 10:11 pm ] |
| Post subject: | |
yeah intruth I have no idea what I really have yet... just beleived the guy... for the price it is good what ever It has.. |
|
| Author: | Baracade [ Sat Sep 17, 2011 10:17 pm ] |
| Post subject: | |
so what details should I post up on the forum... I want to find out as much as I can about my car. original build status... original colour original interior original engine etc etc etc Is there anything I shouldnt upload / declare to the world? |
|
| Author: | adamstuart [ Sat Sep 17, 2011 10:23 pm ] |
| Post subject: | |
It's got the ugly export lights on the front, rear tank, big engine, drums and all the other Export 'bells and whistles' It's either genuine export, or someone went to a lot of effort to rape and pillage and export for the gear to put on yours. At the end of the day, a big wheeler is a big wheeler. Only difference is what you bolt onto it. |
|
| Author: | Morris 1100 [ Sat Sep 17, 2011 10:25 pm ] |
| Post subject: | |
Just post the first bit of the number on the compliance plate or inner guard. If it is an export Moke it should be something like YJBAB13R *** The engine number should be 1204 **** |
|
| Author: | adamstuart [ Sat Sep 17, 2011 10:32 pm ] |
| Post subject: | |
Can't really hurt putting all the details up really.. But if you're worried just leave off the last 2 digits of the body number on the compliance plate. If you look at the ADR's, you can get a list off the net to work out what your car does/doesn't have to have In regards to lap belts or lap sash, high or low backs, whether or not you need a heater (to have a demister) etc Someone who knows exports would be able to tell you all this, but I only know good mokes (read: Morris Mokes )
|
|
| Author: | Baracade [ Sat Sep 17, 2011 10:33 pm ] |
| Post subject: | |
is there a trick to get the engine number to show up... Its super hard to read... |
|
| Author: | Morris 1100 [ Sat Sep 17, 2011 10:35 pm ] |
| Post subject: | |
Baracade wrote: is there a trick to get the engine number to show up... Its super hard to read...
Wire brush Rub it with chalk Magnifying glass |
|
| Author: | adamstuart [ Sat Sep 17, 2011 10:36 pm ] |
| Post subject: | |
Morris 1100 wrote: Baracade wrote: is there a trick to get the engine number to show up... Its super hard to read... Wire brush Rub it with chalk Magnifying glass Screwdriver is a personal favourite of mine |
|
| Author: | Baracade [ Sat Sep 17, 2011 10:43 pm ] |
| Post subject: | |
thanks all... Thanks morris 1100 YJBAB13R *** is my vin... So first step is confirmed.. US Export Moke it is.... |
|
| Author: | adamstuart [ Sat Sep 17, 2011 10:45 pm ] |
| Post subject: | |
it's still an aussie moke, there's nothing US about it It was the intended destination, but never got there So it's all aussie, mate. 
|
|
| Author: | Morris 1100 [ Sat Sep 17, 2011 10:48 pm ] |
| Post subject: | |
The original motor should have ports in the front of the cylinder head for air injection. (little screwed in plugs next to the spark plugs) The yanks wanted the full emissions gear that we never got till later. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|