| ausmini https://www.ausmini.com/forums/ |
|
| Smash Repair/Panel Beaters, Brisbane west https://www.ausmini.com/forums/viewtopic.php?f=2&t=73292 |
Page 1 of 1 |
| Author: | VulcanBB18 [ Wed Sep 28, 2011 9:52 am ] |
| Post subject: | Smash Repair/Panel Beaters, Brisbane west |
Hi All, Last week a bus decided to kiss the rear end of my 1100 - with the following result : 
....so I am chasing quotes for repair. I found one mob who had no problem giving me a quote, after which I haven't been able to find another joint who will agree to even quote! So I'm after reccommendations for any panel shops in the Brisbane West area, I'm half way between Brisbane and Ipswich, so either direction will do! Cheers! Jacob |
|
| Author: | Lockie91 [ Wed Sep 28, 2011 9:54 am ] |
| Post subject: | |
won't the insurance company do this for you anyway? You could try Matt's mate, Stewy's the one into the paint isant he? |
|
| Author: | VulcanBB18 [ Wed Sep 28, 2011 10:14 am ] |
| Post subject: | |
Thanks, but if I was in the position for the insurance company to handle it, I would certainly let them! Arrruuummm I'm not going to ask Matty for a quote 
cheers, |
|
| Author: | MrFail [ Wed Sep 28, 2011 10:17 am ] |
| Post subject: | |
The shop I work at is in fortitude valley. We have done that sort of work before, so I'm sure we'd be happy to quote it. That might be a bit too much in the city for you, but I just thought I'd offer anyway. Pm me if you want the shop details. |
|
| Author: | TheMiniMan [ Wed Sep 28, 2011 11:43 am ] |
| Post subject: | |
i estimate that we wouldn`t quote, but purely estimate an estimation as an estimate 
|
|
| Author: | brett [ Wed Sep 28, 2011 3:02 pm ] |
| Post subject: | |
Carr Creations! 0411588272 They are at Thornlands Brilliant check out my members gallery... Old school panel beater |
|
| Author: | blue_deluxe [ Wed Sep 28, 2011 9:27 pm ] |
| Post subject: | |
brett wrote: Carr Creations! 0411588272
They are at Thornlands Brilliant check out my members gallery... Old school panel beater Id vouch for them too, seeing the level of care they were taking on a mustang out the back and Brett's cooper s was awesome. |
|
| Author: | VulcanBB18 [ Thu Sep 29, 2011 10:45 am ] |
| Post subject: | |
Thanks for the leads everyone, hopefully that should be enough so I can get the second quote. cheers! Jacob |
|
| Author: | Morris 1100 [ Thu Sep 29, 2011 11:05 am ] |
| Post subject: | |
I can help you with a second hand tail light if you want one. |
|
| Author: | VulcanBB18 [ Thu Sep 29, 2011 2:25 pm ] |
| Post subject: | |
Thanks Morris, I've got a few spare but most are pretty "pimply" - I've got the worst one on it now so it's drivable, but once the proper repair is done I might need another "good" one. cheers! Jacob |
|
| Author: | Morris 1100 [ Thu Sep 29, 2011 2:27 pm ] |
| Post subject: | |
VulcanBB18 wrote: Thanks Morris, I've got a few spare but most are pretty "pimply" - I've got the worst one on it now so it's drivable, but once the proper repair is done I might need another "good" one.
cheers! Jacob The ones I have are a little pimply. I just figured that it was better than a missing one!
|
|
| Author: | VulcanBB18 [ Thu Sep 29, 2011 2:36 pm ] |
| Post subject: | |
True enough! The day after the prang I got motivated and did a bit of bashing, & put a light on it :
Took ages to get the wheelarch to clear, those 1100s are damn strong! cheers, Jacob |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|