Should be out of a Morris 1300
| ausmini https://www.ausmini.com/forums/ |
|
| need to know what year this mtor is https://www.ausmini.com/forums/viewtopic.php?f=2&t=7333 |
Page 1 of 1 |
| Author: | min13k [ Wed May 18, 2005 6:16 pm ] |
| Post subject: | need to know what year this mtor is |
what we have here is a guy who is having hassles with the epa has a 72 clubman with a 1275 motor currently in it which replaced the 1100 engine number is 12ye/a/h1930 any one tell me what year this motor is please i'll cheak back soon makka |
|
| Author: | lisian_1275 [ Wed May 18, 2005 6:33 pm ] |
| Post subject: | |
Should be out of a Morris 1300
|
|
| Author: | min13k [ Wed May 18, 2005 6:38 pm ] |
| Post subject: | |
yeah it is a auto bloke but need the year so he can tell the epa to blow it out there arse makka |
|
| Author: | lisian_1275 [ Wed May 18, 2005 6:43 pm ] |
| Post subject: | |
Would be 1969 - 1972 |
|
| Author: | Morris 1100 [ Wed May 18, 2005 6:43 pm ] |
| Post subject: | |
If it a Morris 1300 motor and being such a low number I would guess it was a 1969. |
|
| Author: | drmini in aust [ Wed May 18, 2005 7:15 pm ] |
| Post subject: | |
Morris 1100 wrote: If it a Morris 1300 motor and being such a low number I would guess it was a 1969.
Yep it's a 1300 auto. Mine is #2127, not much later than yours. Remember you need to modify the oilways in it and drill a dipstick hole before you can use it on a manual box.. see me if you need it done. 
|
|
| Author: | min13k [ Wed May 18, 2005 7:48 pm ] |
| Post subject: | |
kev gr built this motor |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|