ausmini https://www.ausmini.com/forums/
chroming internal door locks on 850's https://www.ausmini.com/forums/viewtopic.php?f=2&t=73539	Page 1 of 1

---

Author:	NG [ Thu Oct 13, 2011 9:13 am ]
Post subject:	chroming internal door locks on 850's
mine looks pretty manky. can they be done? i see there is a small spring in there should i remove it? might be cheaper to buy new?

---

Author:	drmini in aust [ Thu Oct 13, 2011 9:17 am ]
Post subject:
I would use chrome paint... They don't come apart, which is really necessary if you are going to electroplate it..

---

Author:	NG [ Thu Oct 13, 2011 9:19 am ]
Post subject:
i did use chrome paint they just look manky after a while. the chrome paint never seems to set hard, maybe ill look into some 2pac chrome paint & cook it in the oven.

---

Author:	Harley [ Thu Oct 13, 2011 9:22 am ]
Post subject:
Paint it body colour instead maybe?

---

Author:	NG [ Thu Oct 13, 2011 9:27 am ]
Post subject:
yes could look good.. but i like the bling is all

---

Author:	peterb [ Fri Oct 14, 2011 12:32 am ]
Post subject:
You could just get them zinc'd, looks nice and you won't have to pull them apart.

---

Author:	mad-mk1 [ Fri Oct 14, 2011 8:35 am ]
Post subject:
Chrome powdercoating comes up ok except needs to get to 200+ degrees. Recon they could handle it? Pm me if your interested or have a spare and Ill see if my mate will do it. He's cheap as, more doing it as a hobby/ to see how to powdercoat! So like I said wouldent be perfect but I was impressed!

---

Author:	NG [ Mon Oct 24, 2011 12:06 pm ]
Post subject:
i ended up doing these in a 2pac metalic paint. they look good & i cooked them in the oven for 20mins.. come out rock hard & shiny.

---

Page 1 of 1	All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/