My Dunlops measure 54mm.
Wheel diameter is very similar to the cap, as you would expect.
| ausmini https://www.ausmini.com/forums/ |
|
| Centre caps for Tasmans Mk2 same as Dunlops? https://www.ausmini.com/forums/viewtopic.php?f=2&t=73690 |
Page 1 of 1 |
| Author: | BBY755 [ Sun Oct 23, 2011 5:06 pm ] |
| Post subject: | Centre caps for Tasmans Mk2 same as Dunlops? |
Just scored a nice set of gold Tasman Mk2 alloys, and would like to know if the Dunlops are the same centre cap? Hole diameter at the front is 52mm..... Have seen the repro tasman Mk2 stickers and need the caps to stick em on! Thanks for any guidance offered.... |
|
| Author: | IndigoBlueCooperS [ Sun Oct 23, 2011 8:18 pm ] |
| Post subject: | |
My Dunlops measure 54mm. Wheel diameter is very similar to the cap, as you would expect.
|
|
| Author: | TheMiniMan [ Sun Oct 23, 2011 8:20 pm ] |
| Post subject: | |
the original caps are different to eachother, but not by much i have a set of (custom made) new caps if you`re interested |
|
| Author: | BBY755 [ Mon Oct 24, 2011 10:36 am ] |
| Post subject: | |
Thanks guys, Will sort out my wheel stock situation and go from there. Thanks for the offer MiniMan! Will let you know if I decide to go ahead. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|