Ausmini
It is currently Sun Aug 17, 2025 7:02 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: fuel tank cleaning
PostPosted: Tue Nov 01, 2011 1:01 pm 
Offline
848cc
848cc

Joined: Sat Oct 15, 2011 9:47 pm
Posts: 150
Location: melbourne
ok guys some tips on how to clean my fuel tank out read so many things would like to hear your tips and hints its an old 850 tank wat to clean with wat to do ..not to do wat material to get rid of crud just an idiots guide would do ha ha thanks lazza


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 01, 2011 2:30 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Jan 21, 2007 9:16 pm
Posts: 3166
Location: North of the Harbour planning my next mini project
How bad is your tank?
I have ordered a tank reseal kit from Caswell and they advise to shake a handful of gyprock fixing screws inside for a few minutes to remove the bulk of the rust.
The outside I have already used a wire brush on the angle grinder.

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged) :)
2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 01, 2011 3:01 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Jun 08, 2004 1:52 pm
Posts: 4434
Location: Melbourne, VIC.
POR15 do a kit for cleaning and resealing tanks. I've no personal experience with it though. I've got an Export Moke tank that needs doing, but baulked at paying something like $150 for the POR15 kit.

_________________
Brett Nicholson
Greendale (near Ballan) VIC.
1971 Morris Mini Moke
1966 Austin Mini
1965 Morris Mini Traveller
1973 LR Series 3 88
2007 LR Freelander 2


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 01, 2011 3:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Jan 21, 2007 9:16 pm
Posts: 3166
Location: North of the Harbour planning my next mini project
The Caswell kit is $79 but for a bike tank. The guy advised that 1 kit should be enough for a mini tank but he sold me 2 kits for $125.
Maybe give them a call Brett, they are in Melbourne

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged) :)
2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 01, 2011 3:15 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Jan 21, 2007 9:16 pm
Posts: 3166
Location: North of the Harbour planning my next mini project
The Caswell kit is $79 but for a bike tank. The guy advised that 1 kit should be enough for a mini tank but he sold me 2 kits for $125.
Maybe give them a call Brett, they are in Melbourne

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged) :)
2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 01, 2011 3:26 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Jun 04, 2008 11:10 am
Posts: 317
Location: Chiswick
Ive done the por15 kit on my bike tank (22L) worked well, removed all the rust and sealed it. You could even just buy their cleaners to remove the rust. There was a bit of sealant to spare so mini tank should be ok.

_________________
So... I'm Seifer


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 01, 2011 3:42 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Jun 08, 2004 1:52 pm
Posts: 4434
Location: Melbourne, VIC.
Thanks Michael, I will do that.

It's only a 25L Export Moke tank (so I can have twin tanks) which is showing light surface rust on the bottom. So a bike kit might be sufficient.

Cheers,

_________________
Brett Nicholson
Greendale (near Ballan) VIC.
1971 Morris Mini Moke
1966 Austin Mini
1965 Morris Mini Traveller
1973 LR Series 3 88
2007 LR Freelander 2


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 01, 2011 6:56 pm 
Offline
998cc
998cc
User avatar

Joined: Wed Jun 30, 2010 8:02 pm
Posts: 806
Location: Woody Point 4019
I used the POR 15 kit. There is enough for two tanks. It did a great job on mine. If you do go that option, make sure you let the product flow out easily after coating the tank, or else it will solidify in the filler neck.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 302 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

cron

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.