ausmini https://www.ausmini.com/forums/ |
|
Moke top arms - plates?! https://www.ausmini.com/forums/viewtopic.php?f=2&t=73964 |
Page 1 of 1 |
Author: | willy [ Sat Nov 05, 2011 4:48 pm ] |
Post subject: | Moke top arms - plates?! |
I posted this exact message on mokesinc, but apparently all posts need to be APPROVED by a moderator before they go public! What a bizarre way to run a forum. ![]() Hi guys, I'm not sure if this is a previous owner mod or not, but I am part way through re-assembling my front subframe and have noticed that on the top arms, there are 10mm plates welded to the flat section, where the bump stop would touch. I assume these are a big-wheeler Moke item, to compensate for the larger rolling diameter (tyre to guard clearance). Is this true? Will. |
Author: | drmini in aust [ Sat Nov 05, 2011 7:27 pm ] |
Post subject: | |
Yes, but on early Mokes, not late. see p189 of Mini King's catalog, there is a pic. will scan it and host her shortly. [edit] this used std dry Mini bump rubbers, later Mokes had different. here ya go- ![]() |
Author: | justfanginaround [ Sat Nov 05, 2011 7:28 pm ] |
Post subject: | |
i have seen this before on a couple of moke that i owned so i belive its factory |
Author: | Timbo [ Sat Nov 05, 2011 7:31 pm ] |
Post subject: | Re: Moke top arms - plates?! |
willy wrote: I posted this exact message on mokesinc, but apparently all posts need to be APPROVED by a moderator before they go public! What a bizarre way to run a forum.
![]() Not all posts, there are different categories of membership. New member's posts get vetted at first to be sure that they are legit. Tim |
Author: | bnicho [ Sat Nov 05, 2011 8:29 pm ] |
Post subject: | Re: Moke top arms - plates?! |
Timbo wrote: willy wrote: I posted this exact message on mokesinc, but apparently all posts need to be APPROVED by a moderator before they go public! What a bizarre way to run a forum. ![]() Not all posts, there are different categories of membership. New member's posts get vetted at first to be sure that they are legit. Tim And not unusual, its the same on two other forums I am an admin on. Stops a lot of spam. |
Author: | thomas_hb [ Sat Nov 05, 2011 9:17 pm ] |
Post subject: | |
willy has been a member of the bustling online metropolis which is Mokesinc since its auspicious inception in May 2011. |
Author: | Timbo [ Sat Nov 05, 2011 9:41 pm ] |
Post subject: | |
Hmm, dunno then, he's not in the special "I'm keeping an eye on you" category either, as far as I can tell. Tim |
Author: | thomas_hb [ Sat Nov 05, 2011 9:58 pm ] |
Post subject: | |
Is under 35, is modded? |
Author: | adamstuart [ Sat Nov 05, 2011 11:51 pm ] |
Post subject: | |
Timbo wrote: Hmm, dunno then, he's not in the special "I'm keeping an eye on you" category either, as far as I can tell.
Tim Lol, i'd be surprised if willy was in that category, even I'm not in that one! |
Author: | CARTER_GT [ Sun Nov 06, 2011 12:32 am ] |
Post subject: | |
Why do people even bother on that forum??? There is plenty more info on this forum and this forum has far better people. Atleast on this forum if your under 35 and have an opinion you atleast stand half a chance. Unlike on that forum where I got banned for telling someone that a moke really is a mini with a bathtub as a body. The mods are basically useless and the guy who created it all... Oh god let's not even go there. T BAGGING FTW! |
Author: | willy [ Sun Nov 06, 2011 3:19 am ] |
Post subject: | |
Thanks for the positive input guys. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |