Decent info in here written by GR regarding RE13
http://www.minimania.com/web/SCatagory/ ... ticleV.cfm
Steve,
| ausmini https://www.ausmini.com/forums/ |
|
| RE13 Camsahaft Setup https://www.ausmini.com/forums/viewtopic.php?f=2&t=74052 |
Page 1 of 1 |
| Author: | wickedwazza [ Tue Nov 08, 2011 4:22 pm ] |
| Post subject: | RE13 Camsahaft Setup |
Hi, can someone confirm the setup for a RE13 cam, just rebuilding it now and thought it was 108 ATDC, but checking thru the messages looks like 105.5. Therefore is the "after TDC full inlet lift 105.5 or 108? thanks |
|
| Author: | drmini in aust [ Tue Nov 08, 2011 7:15 pm ] |
| Post subject: | |
105.5° is about right. On 1275s I set them at 104° (the chain will stretch soon enough, haha) |
|
| Author: | Mini68 [ Tue Nov 08, 2011 8:16 pm ] |
| Post subject: | |
GR told me to set mine at 103/104 atdc on my 1360. |
|
| Author: | drmini in aust [ Tue Nov 08, 2011 8:53 pm ] |
| Post subject: | |
Mini68 wrote: GR told me to set mine at 103/104 atdc on my 1360.
Yes but he also told me smallbores like it retarded a couple of degrees.. so 106 or so. |
|
| Author: | jethro [ Tue Nov 08, 2011 11:18 pm ] |
| Post subject: | |
yes, mine is a 998 and he told me 106 also |
|
| Author: | CARTER_GT [ Tue Nov 08, 2011 11:25 pm ] |
| Post subject: | |
Decent info in here written by GR regarding RE13 http://www.minimania.com/web/SCatagory/ ... ticleV.cfm Steve,
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|