ok guys having trouble with the rear subframe support pins cant seam to get them to budge are they threaded or or do i just hit them with hammer . Just cant seem to get them out any suggestions please.
They have probably been in there since 1962
| ausmini https://www.ausmini.com/forums/ |
|
| rear subframe support pin https://www.ausmini.com/forums/viewtopic.php?f=2&t=74366 |
Page 1 of 1 |
| Author: | LAZZA1964 [ Sun Nov 27, 2011 8:49 pm ] |
| Post subject: | rear subframe support pin |
ok guys having trouble with the rear subframe support pins cant seam to get them to budge are they threaded or or do i just hit them with hammer . Just cant seem to get them out any suggestions please. They have probably been in there since 1962
|
|
| Author: | simon k [ Sun Nov 27, 2011 9:21 pm ] |
| Post subject: | |
depends which ones you're talking about.... the subframes are held at the front with a pair of 1/2" head bolts pointing forwards, and at the rear, a pair of 1/2" head bolts pointing upwards. Undo those, and the subframe drops out The big pins stay in the subframe |
|
| Author: | Harley [ Sun Nov 27, 2011 10:15 pm ] |
| Post subject: | |
And if the frame is already removed from the car, the rear mounting pins are welded into the frame, the front ones have a nut holding them in hidden behind the trailing arm. |
|
| Author: | LAZZA1964 [ Mon Nov 28, 2011 5:50 am ] |
| Post subject: | subframe pin |
thanks guys much apreciated 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|