12A1176
&
12A1177
| ausmini https://www.ausmini.com/forums/ |
|
| Tappet chest gasket question https://www.ausmini.com/forums/viewtopic.php?f=2&t=74430 |
Page 1 of 1 |
| Author: | 68AUTO [ Wed Nov 30, 2011 9:13 pm ] |
| Post subject: | Tappet chest gasket question |
Rubber or Cork? Is there any factors that affect which type I buy? or is it personal choice? |
|
| Author: | dodge [ Wed Nov 30, 2011 9:18 pm ] |
| Post subject: | |
i am about to change mine, i have red rubber ones but have a small leak so im going back to cork |
|
| Author: | drmini in aust [ Wed Nov 30, 2011 9:29 pm ] |
| Post subject: | |
They are 2 different sizes.. The cork or `rubberized cork' ones suit the early covers, 850-998-1098(their middle bit sticks outwards and the gasket face is flat). The red silicone rubber ones suit the later covers 998 Clubby and Cooper S, these are dished in the middle. I have never had one of these leak from the gasket. But they will leak around the bolt if you don't use the right cupped washer and square rubber seal ring. |
|
| Author: | TheMiniMan [ Wed Nov 30, 2011 9:59 pm ] |
| Post subject: | |
12A1176 & 12A1177
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|