| ausmini https://www.ausmini.com/forums/ |
|
| Turbo, SU and Manifold https://www.ausmini.com/forums/viewtopic.php?f=2&t=7465 |
Page 1 of 1 |
| Author: | Gordo [ Mon May 23, 2005 1:09 pm ] |
| Post subject: | Turbo, SU and Manifold |
Hey all im just wondering how much i would be looking at paying for a turbo, SU and the manifold complete off a standard metro turbo?? Cheers Daniel |
|
| Author: | ausminis4u [ Mon May 23, 2005 2:55 pm ] |
| Post subject: | |
about $1000 now.... getting hard to get here and now uk is charging excessive rates for post ex uk......... |
|
| Author: | Gordo [ Mon May 23, 2005 2:58 pm ] |
| Post subject: | |
Thanks ausminis4u, do you know what the SU is? Is it a HIF44 or something like that? |
|
| Author: | Boostedmini [ Mon May 23, 2005 4:44 pm ] |
| Post subject: | |
i bought my metro turbo engine complete with turbo and carb etc about 7 years ago for $1500 (very rare here at the time) now about the $1000 mark as Ausmini said. yes the carb is a specifi HIF44/6 carb special for turbo as it has orifice to pressureise the float chamber. |
|
| Author: | Gordo [ Mon May 23, 2005 4:52 pm ] |
| Post subject: | |
Boostedmini wrote: now about the $1000 mark as Ausmini said.
Are you saying $1000 for the whole engine or just for the turbo setup on it?? |
|
| Author: | Stuartminidlx [ Mon May 23, 2005 7:48 pm ] |
| Post subject: | |
u can buy the carbs for $500 bucks. or get a hif44 converted for 350 from memory u could get a turbo for around $250 but i'm not sure on manifold costs |
|
| Author: | Boostedmini [ Tue May 24, 2005 8:00 pm ] |
| Post subject: | |
you could prob get a complete turbo setup (no engine) for $1000, prob 1500 to 2000 for the complete engine and turbo (needing rebuild for sure) |
|
| Author: | Gordo [ Wed May 25, 2005 5:59 pm ] |
| Post subject: | |
No worries, thanks heaps for your help |
|
| Author: | benjamin [ Wed May 25, 2005 8:51 pm ] |
| Post subject: | |
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 43494&rd=1 |
|
| Author: | MiniK [ Wed May 25, 2005 9:13 pm ] |
| Post subject: | |
I paid $500 for a complete manifold, turbo, carb and plenum about a year ago, but have since taken the carb and plenum and sold off the rest... As others have said, pretty hard to find a carb or plenum for less than $500 now..... Carbs are easer to find, the plenums are the rare beastie 
|
|
| Author: | benjamin [ Wed May 25, 2005 9:17 pm ] |
| Post subject: | |
i just bought a carb manifold and plenium for $230 on ebay but im going to use a mirage motosport manifold an a t2 instead of the metro t3 still expensive though http://freespace.virgin.net/richj.barnett/index2.htm |
|
| Author: | MiniK [ Wed May 25, 2005 9:27 pm ] |
| Post subject: | |
benjamin wrote: i just bought a carb manifold and plenium for $230 on ebay but im going to use a mirage motosport manifold an a t2 instead of the metro t3
still expensive though http://freespace.virgin.net/richj.barnett/index2.htm Too expensive.....your better off making a custom manifold in my opinion. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|