ausmini
https://www.ausmini.com/forums/

Where is the best place to buy Hypatec pistons?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=74656		 Page 1 of 1
Author:  Kennomini [ Sat Dec 17, 2011 6:38 pm ]
Post subject:  Where is the best place to buy Hypatec pistons?
Where is the best place to buy Hypatec pistons :?:
Is it as obvious as going to their website or what :?:
I want to bore my 1275 A+ out to 1360cc so what exact overbore am I looking for :?:
Author:  drmini in aust [ Sat Dec 17, 2011 6:59 pm ]
Post subject:  Re: Where is the best place to buy Hypatec pistons?
Kennomini wrote:
Where is the best place to buy Hypatec pistons :?:
Is it as obvious as going to their website or what :?:
I want to bore my 1275 A+ out to 1360cc so what exact overbore am I looking for :?:

I buy from either Minis Plus or Minisport SA, these 2 are cheapest I found.
1360 is 73.0mm, aka +.094" oversize. :wink:

Buy the pistons + rings before getting it bored. :wink:

[edit] for example only- Minis Plus' price may be cheaper, or not.
It's worth getting the chrome ring set for a road car, they last longer.
http://minisport.com.au/prod1170.htm
Author:  kirby [ Sat Dec 17, 2011 7:54 pm ]
Post subject: 
You can buy them direct from precision int now, They are the supplier in aus as far as I know. They will be able to get you the cheapest price.
Author:  drmini in aust [ Sat Dec 17, 2011 8:22 pm ]
Post subject: 
kirby wrote:
You can buy them direct from precision int now, They are the supplier in aus as far as I know. They will be able to get you the cheapest price.

Not going by their prices to the public I saw recently... :wink:
Minisport and Minis plus buy so many sets, Precision's recommended price goes out the window.
Author:  kirby [ Sat Dec 17, 2011 10:37 pm ]
Post subject: 
Just call em up. Seeing as they give the prices to Minisport and Minis plus they will be happy to match a price and pocket that nice retail margin. :wink:
Author:  TheMiniMan [ Sat Dec 17, 2011 10:44 pm ]
Post subject: 
no no no,,, just buy them through me,,, everyone should buy them through me,,, i would make it 'feel" like you`re getting a good deal,,, make you laught telling you jokes & storeys,,, you`d all "feel" better in that you`ve helped keep a local mini parts & service source open & all is peachy

i`d probly just buy them through Lindsay anyways because he would probably want a pile of my 1275 primary gear thrust washers or oil pump adaptor plates or gear-shift seal bushes so we`d do some kinda contra deal to save paying to much cash either way

& everyones happy

:-)
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/