or could someone please measure where theres is, so I can get somewhere in the ball park
| ausmini https://www.ausmini.com/forums/ |
|
| Door Fitment issues https://www.ausmini.com/forums/viewtopic.php?f=2&t=74670 |
Page 1 of 1 |
| Author: | brett [ Sun Dec 18, 2011 7:03 pm ] |
| Post subject: | Door Fitment issues |
Hi guys, trying to refit the doors. they fit nice, shut nice, but if u pull on it, it will move about 1/2 cm out.. Any ideas?? |
|
| Author: | doogie [ Sun Dec 18, 2011 7:16 pm ] |
| Post subject: | |
You need to adjust the striker plate. Doogie |
|
| Author: | brett [ Sun Dec 18, 2011 8:03 pm ] |
| Post subject: | |
i have tried it all the way forward and back... theres only about a 1mm or so lip. I will keep trying |
|
| Author: | brett [ Sun Dec 18, 2011 8:03 pm ] |
| Post subject: | |
or could someone please measure where theres is, so I can get somewhere in the ball park
|
|
| Author: | Harley [ Sun Dec 18, 2011 8:51 pm ] |
| Post subject: | |
The striker should have two lips, a big one and a small one, about 1/2 inch apart. You got that or a modified home job? 
|
|
| Author: | brett [ Sun Dec 18, 2011 8:55 pm ] |
| Post subject: | |
And the penny drops.... I was thinking the big one was the main one.... 
|
|
| Author: | Harley [ Sun Dec 18, 2011 10:53 pm ] |
| Post subject: | |
The big one is the main one. When the door closes slowly, there should be a 2 clicks: the first is the small lip, and thats there as a safety thing, the next one further back with more engagement is what holds the door closed firmly and in the right spot. |
|
| Author: | brett [ Sun Dec 18, 2011 11:54 pm ] |
| Post subject: | |
yep got it working!! Thanks! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|