| ausmini https://www.ausmini.com/forums/ |
|
| hot wire https://www.ausmini.com/forums/viewtopic.php?f=2&t=74943 |
Page 1 of 1 |
| Author: | wolfmini [ Wed Jan 11, 2012 8:25 am ] |
| Post subject: | hot wire |
hi, a question........ if the ignition is left on for 5 mins, should any of the wires get hot? not melting the plastic hot, but pretty hot. would this indicate there is too much load on this wire rather than a short? or is this pretty normal? thanks ryan |
|
| Author: | wolfmini [ Wed Jan 11, 2012 8:27 am ] |
| Post subject: | |
i should add it is one of the wires going into the steering column (not sure which one) on a 1988 mayfair |
|
| Author: | GT mowog [ Wed Jan 11, 2012 10:06 am ] |
| Post subject: | |
Probably. The looms in the UK cars are quite spindly and light on for gauge. They rate theirs at a 20 deg ambient, where as the Ozzy stuff is rated at 40 deg ambient. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|