ausmini https://www.ausmini.com/forums/ |
|
Building a Mini Cooper Raft It Kinda rolled during the race. https://www.ausmini.com/forums/viewtopic.php?f=2&t=74993 |
Page 1 of 6 |
Author: | brett [ Fri Jan 13, 2012 11:02 pm ] |
Post subject: | Building a Mini Cooper Raft It Kinda rolled during the race. |
Hi, I am chasing a pic on a floating mini raft.. we are building it this weekend, and need some ideas. currently we have 4 44gallon drums... ( no we didnt make trips in a P76 ![]() Has anyone done one before?? Cheers Brett |
Author: | Kennomini [ Fri Jan 13, 2012 11:22 pm ] |
Post subject: | |
is it a raft to support a mini or just a small raft? |
Author: | brett [ Fri Jan 13, 2012 11:47 pm ] |
Post subject: | |
we have a mini body shell, and 44 gallon drums fit the wheel wells perfectly So we are going to cut the body and weld the drums... Just hoping 4 drums fit Its OK its only a Deluxe, not a Clubby!! ![]() ![]() |
Author: | 74snail [ Sat Jan 14, 2012 12:29 am ] |
Post subject: | |
The idea should have been a complete car with motor but no rear subframe on a pontoon that v-shaped at the front , front rims with v paddles welded on ( like the water channel paddles ) , would need to be counter weighted at the back to compensate for the forward weight of the motor some heavy U channel across under the back might work , oversize rudder control could easily come up through the floor where the handbrake is ( the idea is ok in my head bit hard to explain ) using a small lathe wheel like this ( the one on the right ) then geared on a shaft to the rudder at the back ![]() tilt and trim control just eludes me for now , how much contact the spinning wheels have to provide efficient drive would depend on whether the hull displaces water or begins to plane . |
Author: | brett [ Sat Jan 14, 2012 12:44 am ] |
Post subject: | |
Yeah, we only have 1 day to build it, and paint it! so nothing elaborate, its going to involve 4 paddles so 4 person power |
Author: | d1ck0 [ Sat Jan 14, 2012 7:04 am ] |
Post subject: | |
Make sure we get pics..... |
Author: | brett [ Sat Jan 14, 2012 10:55 am ] |
Post subject: | |
![]() This is the style we are wanting to do!! ![]() |
Author: | Mick [ Sat Jan 14, 2012 11:37 am ] |
Post subject: | |
Is there something we need to know? Is this the end? Is there another great flood? |
Author: | brett [ Sat Jan 14, 2012 11:52 am ] |
Post subject: | |
Well a flood is well overdue... At one stage we were have a major flood every 11 months ![]() |
Author: | BBY755 [ Sat Jan 14, 2012 1:47 pm ] |
Post subject: | |
It is ......2012 after all! Pays to be prepared ![]() |
Author: | brett [ Sat Jan 14, 2012 7:21 pm ] |
Post subject: | |
![]() ![]() ![]() Getting there!! |
Author: | frednutz&co [ Sat Jan 14, 2012 7:34 pm ] |
Post subject: | |
why ![]() |
Author: | Morris 1100 [ Sat Jan 14, 2012 7:36 pm ] |
Post subject: | |
More important, what is the roof like above the back window and above the left hand B-pillar? (The inner rails) That parcel shelf looks good too! |
Author: | brett [ Sat Jan 14, 2012 8:37 pm ] |
Post subject: | |
The roof is not to bad. But its in the tip trailer now .... Why? The Bollon raft regatta next weekend |
Author: | Kennomini [ Sun Jan 15, 2012 12:31 am ] |
Post subject: | |
It looked like a good mini, I've got worse ones in my shed I plan to repair ![]() Seems like a wast to me ![]() ![]() |
Page 1 of 6 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |