It might be reasonable for what it is, but it isn't practicle.
If tou want to see discs in the rear, use a motprbike one as a spacer.
| ausmini https://www.ausmini.com/forums/ |
|
| anyone seen these - rear disc brake setup minisport https://www.ausmini.com/forums/viewtopic.php?f=2&t=7511 |
Page 1 of 1 |
| Author: | aussie [ Tue May 24, 2005 7:51 pm ] |
| Post subject: | anyone seen these - rear disc brake setup minisport |
theyve been listed on ebay bout a week, though will might be interested. $1,595.00 <--reasonable http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 91690&rd=1 |
|
| Author: | Harley [ Tue May 24, 2005 7:55 pm ] |
| Post subject: | |
It might be reasonable for what it is, but it isn't practicle. If tou want to see discs in the rear, use a motprbike one as a spacer.
|
|
| Author: | bnicho [ Tue May 24, 2005 8:00 pm ] |
| Post subject: | |
A mate has these on his SPi fitted UK MkIII Mini. They stop well but the handbrake is a bit fragile if you try and use it for Motorkhanas. Rear pressure limiter needed a tweak to preventwheel lockup atthe rear. Pads are identical to some motorbike ones. Overkill on a Mini in my opinion, unless you are building something with a huge turbo donk. |
|
| Author: | drmini in aust [ Tue May 24, 2005 8:01 pm ] |
| Post subject: | |
I've been told those KADs use motorcycle pads, not sure if caliper is bike too or KAD. Do they have a mechanical handbrake? Lot of money.. to brake the rear of a car that needs bugger-all rear braking, particularly when modified with big front brakes.. Of course they are Bling, but needless Bling.. 
|
|
| Author: | simon k [ Tue May 24, 2005 8:26 pm ] |
| Post subject: | |
very expensive bling, and like Brett says, the handbrake uses a cam action, so under handbrake tuurns, it'd fall to pieces they're all custom made by KAD, incl the callipers you want rear disks, wait for Besser to get his sorted out 
|
|
| Author: | sg [ Wed May 25, 2005 7:50 am ] |
| Post subject: | |
Repost x 3 
|
|
| Author: | Chris [ Wed May 25, 2005 11:10 am ] |
| Post subject: | |
skssgn wrote: you want rear disks, wait for Besser to get his sorted out And they are? |
|
| Author: | ausminis4u [ Wed May 25, 2005 11:13 am ] |
| Post subject: | |
they have a mech hand brake........ KAD caliper...... im thinking of doing my own rear disc conversion.......... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|