| ausmini https://www.ausmini.com/forums/ |
|
| Fitting a right hand tank instructions https://www.ausmini.com/forums/viewtopic.php?f=2&t=75132 |
Page 1 of 1 |
| Author: | Convertible Mini [ Sun Jan 22, 2012 9:12 pm ] |
| Post subject: | Fitting a right hand tank instructions |
I tried to download and print the instructions from Minispares UK site how to fit the 4 bolt bracket for the right hand tank strap that goes on the back Firewall. No luck. Has any one got it that I can print please? or a link or better still email it to me. Thanks. |
|
| Author: | AEG163job [ Mon Jan 23, 2012 8:29 am ] |
| Post subject: | |
I can't see that this would be too high tech - just a matter of drilling 4 holes, assuming the bracket is the same as the factory one. PM me if you want a template for the holes. |
|
| Author: | michaelb [ Mon Jan 23, 2012 9:19 am ] |
| Post subject: | |
I can also help with details of where to drill the holes. I fitted the same bracket on the weekend but had the luxury of being able to take measurements from my Cooper S. |
|
| Author: | Convertible Mini [ Mon Jan 23, 2012 4:57 pm ] |
| Post subject: | I have done it. |
It is not rocket science. I have done it. It is much easier than fitting the Electric Power steer Unit I tell you. Car goes to paint shop this week. Getting extra excited now. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|