ausmini
https://www.ausmini.com/forums/

ebay... legit Clubby LS?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=7552		 Page 1 of 3
Author:  sss [ Wed May 25, 2005 8:47 pm ]
Post subject:  ebay... legit Clubby LS?
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... eName=WDVW

Will be checking this lil thing out tomorrow hopefully... Any thoughts? :D
Author:  benjamin [ Wed May 25, 2005 8:59 pm ]
Post subject: 
looks pretty good love the seat covers too superman :)
Author:  J_A_M [ Wed May 25, 2005 9:07 pm ]
Post subject: 
I saw this on ebay before....

I say it's not a real 1275 LS.

Wrong colour
Wrong trim (seat trim AND door cards)
No grille lights
Grille badge is incorrect
Incorrect wheels
etc

My money says its a stokko 78 Clubby (modified)


ebay seller wrote:
newsflash! Relisting due to ebay website malfunction in the critical last hour of first auction!


YEA RIGHT! :lol:
Author:  nermil [ Wed May 25, 2005 9:12 pm ]
Post subject: 
it does look to have *some* LS bits though. it has the right seats, though they have obv been recovered (see the release in one of the pix). also has the extra switch in the wiper control panel, and the Park Brake/Brake Fail lights, and tacho.

those door trims could be original out of the nuggett gold LS perhaps ...
Author:  J_A_M [ Wed May 25, 2005 9:16 pm ]
Post subject: 
Quote:
it has the right seats, though they have obv been recovered (see the release in one of the pix). also has the extra switch in the wiper control panel, and the Park Brake/Brake Fail lights, and tacho.


All available in standard clubby. Kev's sons clubby has all those bits and its an S.

All very late seats were like that too. Bolted to the TOP of the Xmember.
Author:  benjamin [ Wed May 25, 2005 9:19 pm ]
Post subject: 
has internal bonnet release too
Author:  J_A_M [ Wed May 25, 2005 9:21 pm ]
Post subject: 
how do u know that?
Author:  benjamin [ Wed May 25, 2005 9:22 pm ]
Post subject: 
J_A_M wrote:
how do u know that?


no hole in grill and you can see it in the dash pic
Author:  J_A_M [ Wed May 25, 2005 9:26 pm ]
Post subject: 
i dont see it in the dash pic...i do see the dimmer knob though :wink:
Author:  drmini in aust [ Wed May 25, 2005 9:32 pm ]
Post subject: 
Internal bonnet release wasn't std on LS, AFAIK- I was working on the boss's 3 cylinder 1275LS today, it's got a stock release like any Clubby.
(#4 plug was oiled up... so I pulled the plug lead 1/2 way off until it caught fire again..) :wink:
Author:  czerial [ Wed May 25, 2005 9:37 pm ]
Post subject: 
hmmmmmmmm, well. the interior colours are off a nugget gold LS, (bar the green of course)
it shouldnt have foggies as its a 1275 (only 998's came with spotties).
the gauge binnacle is also off 1275LS (only they had the extra Alt and Oil lights
you see those two round lights...) has the centre roof aerial and does not look to
be a covering over the old spot if it had of been on the guard.

i dunno, my money is that it could be. the best way to tell is obviously the vin number
and eng number. curious as to why he didnt list. but, well. caveot emptor (or however you spell buyer beware in latin :lol:
Author:  Harley [ Wed May 25, 2005 10:21 pm ]
Post subject: 
I'm more interested in the 13x6 wheels on there in what appears to be stock flares compared to those sportspack arches or similar.
Author:  sss [ Wed May 25, 2005 10:41 pm ]
Post subject: 
yuo guys certainly know your stuff :shock: haha i quite like the colour and certainly hope it is pretty rust free.. engine number is as follows 12YTAH4763 from what i've looked up is that a Morris 1100S motor? wonder how those 13x6's fit also... what are numbers to look out for in the VIN? his reserve hasnt even been met yet.. whats the max anyone on here would pay for this pseudo LS? will have to ask this guy a mountain of questions for sure
Author:  drmini in aust [ Thu May 26, 2005 7:35 am ]
Post subject: 
Only real diff between 1100S and 1275LS motors was the LS got smog head, air pump etc. :wink:
Author:  Morris 1100 [ Thu May 26, 2005 8:00 pm ]
Post subject: 
I wonder about his "twin su downdraught carbies"
Page 1 of 3 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/