Official length of an 850 in old money is 10ft 0-1/4".
=3,054.35mm in new money.
| ausmini https://www.ausmini.com/forums/ |
|
| Round nose mini length in mm https://www.ausmini.com/forums/viewtopic.php?f=2&t=75706 |
Page 1 of 1 |
| Author: | Kermit [ Sun Feb 26, 2012 9:31 pm ] |
| Post subject: | Round nose mini length in mm |
Hi guys just wondering can any one tell me how long from nose to tail a round nose mini is? Thanks in advance =) |
|
| Author: | Harley [ Sun Feb 26, 2012 9:42 pm ] |
| Post subject: | |
10 feet, or 3050mm. |
|
| Author: | Mike_Byron [ Mon Feb 27, 2012 3:29 pm ] |
| Post subject: | |
I thought a min was 10 feet four inches ??? what ever that translates to in the new english ??? Mike |
|
| Author: | Harley [ Mon Feb 27, 2012 4:30 pm ] |
| Post subject: | |
Isn't that clubby? |
|
| Author: | MINImal effort [ Mon Feb 27, 2012 5:29 pm ] |
| Post subject: | |
http://www.minimania.com/web/SCatagory/PANELS/DisplayType/Technical%20Information/DisplayID/596/ArticleV.cfm |
|
| Author: | 1071 S [ Mon Feb 27, 2012 7:26 pm ] |
| Post subject: | |
Isn't the main Japanese Mini club called "Club 305" for some reason??? Cheers, Ian |
|
| Author: | 1310/71 [ Mon Feb 27, 2012 8:53 pm ] |
| Post subject: | |
Mike_Byron wrote: I thought a min was 10 feet four inches ??? what ever that translates to in the new english ???
Mike Roundnose is definitely 10 feet. 10 feet 4 for a clubbie sounds about right. The simple answer - yours is! do you still have the 850 or has that gone? KB |
|
| Author: | Mike_Byron [ Tue Feb 28, 2012 7:19 am ] |
| Post subject: | |
KB The 850 went to Tassie about june last year. It was paid for upfront but sat here for nearly two years until it was picked up. I havn't heard how it is progressing. I am working on Regina's roundy PV at present. Mike |
|
| Author: | drmini in aust [ Tue Feb 28, 2012 9:10 am ] |
| Post subject: | |
Official length of an 850 in old money is 10ft 0-1/4". =3,054.35mm in new money.
|
|
| Author: | The Ranger 89 [ Tue Feb 28, 2012 4:14 pm ] |
| Post subject: | |
my headlights are the furthermost forward, (De Bumpered) and my exhaust sticks out the rear the most, ive managed to squeese the mini into a 3x3m kit shed! bit of bow out in the rear wall but is fits 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|