ausmini
https://www.ausmini.com/forums/

Time to pull the finger out - Easter promise
https://www.ausmini.com/forums/viewtopic.php?f=2&t=76246
Page 1 of 1

Author:  Wombat [ Wed Apr 04, 2012 5:09 pm ]
Post subject:  Time to pull the finger out - Easter promise

I will spend time on the Mini this weekend - starting with using the adjustable rear wheel set up to align the rear wheels. Might even try and photograph it for a how-to.

Author:  tomtom [ Wed Apr 04, 2012 5:41 pm ]
Post subject: 

Will fix up the front suspension, get it back on the ground and paint the roof english cream!

Author:  adamstuart [ Wed Apr 04, 2012 6:39 pm ]
Post subject: 

Easter promise - Work as much over time as possible to pay to fix the car :cry:

Author:  123grosso [ Wed Apr 04, 2012 7:56 pm ]
Post subject: 

buy a welder and learn how to use it, maybe fix the rust in the boot by next weekend depending how quick i learn

Author:  drmini in aust [ Wed Apr 04, 2012 8:04 pm ]
Post subject: 

Leave both Minis alone... 8)

Author:  grey 64 [ Wed Apr 04, 2012 8:25 pm ]
Post subject: 

drmini in aust wrote:
Leave both Minis alone... 8)

Same for my four minis. As for my brothers HG, well its gunna have a heart transplant :)

Author:  coopar [ Wed Apr 04, 2012 9:26 pm ]
Post subject: 

123grosso wrote:
guy a welder and learn how to use it, maybe fix the rust in the boot by next weekend depending how quick i learn


Dont forget to buy gas, not fun learning without

Author:  Mike Montgomery [ Thu Apr 05, 2012 7:51 am ]
Post subject: 

FINALLY do an oil change and clean my airfilters. Will also adjust the hilo's to better suit the new wheels :D

Author:  seifer [ Thu Apr 05, 2012 9:19 am ]
Post subject: 

Start stripping and welding this w/e.

I do things naked.

Author:  Wombat [ Thu Apr 05, 2012 10:16 am ]
Post subject: 

seifer wrote:
Start stripping and welding this w/e.

I do things naked.


May I suggest a leather loin cloth would not be out of character

Author:  clovus [ Thu Apr 05, 2012 4:07 pm ]
Post subject: 

Drive it everyday :lol: :lol: :lol:

Author:  IwannaMini [ Thu Apr 05, 2012 4:23 pm ]
Post subject: 

clovus wrote:
Drive it everyday :lol: :lol: :lol:


X 2...

:lol:

Author:  sgc [ Thu Apr 05, 2012 5:07 pm ]
Post subject: 

1. Finish building formwork for rammed earth walls.
2. Dig strip footings for test wall, assemble forms and place rebar.
3. Drill and chemset starter bars in the slab for rammed earth walls.
4. Build a metering box for mixing sand/earth/cement with the bobcat.
5. Screen 99 metric assloads of soil.
6. Install a 100mm aggie drain behind the retaining wall.

None of this involves driving the Mini :cry:

Author:  CARTER_GT [ Thu Apr 05, 2012 6:30 pm ]
Post subject: 

To atleast start to get this new(ish) motor in :D All for getting it ready for Hay.

Author:  Aussie Brian [ Fri Apr 06, 2012 7:19 am ]
Post subject: 

Wombat wrote:
seifer wrote:
Start stripping and welding this w/e.

I do things naked.


May I suggest a leather loin cloth would not be out of character


Let me guess................Stick welding!!!!!!! :lol: :lol:

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/