It's from the Aztecs...THE WORLD WILL END
As far as I know they don't mean anything, most if not all frames will similar markings on them. I'm pretty sure they are just factory assembly codes.
| ausmini https://www.ausmini.com/forums/ |
|
| Hydrolastic sub frame https://www.ausmini.com/forums/viewtopic.php?f=2&t=76271 |
Page 1 of 1 |
| Author: | tomar [ Fri Apr 06, 2012 11:55 am ] |
| Post subject: | Hydrolastic sub frame |
I have a subframe with the numbers 21A588 stenciled in white paint ,above the number is a blue circle with a star in it.These numbers are on the front of the subframe and could not be seen until it was taken out ... ? |
|
| Author: | TheMiniMan [ Fri Apr 06, 2012 1:40 pm ] |
| Post subject: | |
& ? |
|
| Author: | tomar [ Fri Apr 06, 2012 4:33 pm ] |
| Post subject: | Hydrolastic Subframe |
Apologies I should have asked the question ....., "Does any body know what this means" |
|
| Author: | Kennomini [ Fri Apr 06, 2012 4:38 pm ] |
| Post subject: | |
It's from the Aztecs...THE WORLD WILL END
As far as I know they don't mean anything, most if not all frames will similar markings on them. I'm pretty sure they are just factory assembly codes. |
|
| Author: | raisto2 [ Fri Apr 06, 2012 5:49 pm ] |
| Post subject: | |
Kennomini wrote: It's from the Aztecs...THE WORLD WILL END
got it in one...
|
|
| Author: | simon k [ Mon Apr 09, 2012 12:08 pm ] |
| Post subject: | |
it's just the subframe's part number... |
|
| Author: | Monaco [ Tue Apr 10, 2012 10:46 am ] |
| Post subject: | |
I think you will find the star in the circle is the acceptance mark (i.e. passed quality control). Just a check to make sure all the nuts were done up! On modern cars they paint mark the nuts/parts as they go through the assembly process, you will often see three paint colour marks on diffs etc.... |
|
| Author: | drmini in aust [ Tue Apr 10, 2012 1:10 pm ] |
| Post subject: | |
Monaco wrote: On modern cars they paint mark the nuts/parts as they go through the assembly process, you will often see three paint colour marks on diffs etc....
I find this on the locknuts inside Oz Mini steering racks, too. |
|
| Author: | simonw [ Sun Jul 09, 2017 12:24 pm ] |
| Post subject: | Re: Hydrolastic sub frame |
67 deluxe   Sent from my iPad using Tapatalk |
|
| Author: | AEG163job [ Sun Jul 09, 2017 3:59 pm ] |
| Post subject: | Re: |
Monaco wrote: I think you will find the star in the circle is the acceptance mark (i.e. passed quality control). Yeah, like the stars you used to get for doing good things at school. I never got any. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|