On the front sub-frame, what is this bracket for? It's not being used on my mini k but just wondering.
| ausmini https://www.ausmini.com/forums/ |
|
| What is this for - bracket on the front subframe https://www.ausmini.com/forums/viewtopic.php?f=2&t=76320 |
Page 1 of 1 |
| Author: | rup [ Tue Apr 10, 2012 9:29 pm ] |
| Post subject: | What is this for - bracket on the front subframe |
On the front sub-frame, what is this bracket for? It's not being used on my mini k but just wondering.
|
|
| Author: | Mick [ Tue Apr 10, 2012 9:37 pm ] |
| Post subject: | |
It's a horn mount (I think?) |
|
| Author: | drmini in aust [ Tue Apr 10, 2012 10:06 pm ] |
| Post subject: | |
Yep, horn mount. |
|
| Author: | rup [ Tue Apr 10, 2012 10:23 pm ] |
| Post subject: | |
OK Thanks both, makes sense... So currently the horn in my k is hanging off the side of the engine bay. Is that wrong? |
|
| Author: | Mick [ Tue Apr 10, 2012 10:26 pm ] |
| Post subject: | |
Only if it gets in the way... |
|
| Author: | mini_mad_matt [ Tue Apr 10, 2012 10:39 pm ] |
| Post subject: | |
I kinda recall that if you have the horn there on the subframe it interferes with changing the oil filter, as you normally pass the filter over to that corner so you can let it down. So it may be more sensible to have the horn elsewhere. 
|
|
| Author: | rup [ Wed Apr 11, 2012 6:15 am ] |
| Post subject: | |
All righty then, I'll leave the horn where it is. Thanks every one. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|